R-100 4X4

1789174892112.png


Clean up is going well .. Should come out of the cooker with all the grime gone ..
 
Here's a brief update on the 496" stroker motor I spun together a while back ...

1789260576262.png


Owner is making good progress ..

1789260680505.png


Richmond 5-speed looks right at home ...
This 62 C10 step-side is well on it's way to becoming a slick truck ..
 
Well ... Did a little boneyard scouting and found a remote reservoir power steering pump .. Already rebuilt a pump for the big block, going to pull it apart and change out the shell ..

703397072_10239217774041266_8046468573483565585_n.jpg


Tis a little bit of backing up ..

4cf80e9a-bcdc-474f-8073-f4bf5945d44c.jpg


Powder coat laid down nicely ...

b26fdf57-b67d-467e-8bf4-aacf9be7dabd.jpg


Locating the reservoir up high will make for easy access .. Just need to find a hose that won't dissolve to run from the tank to the pump, and that modification will be done ...
 
Last edited:
Been busy with painting ..

775799047_10240556068737797_679138708675331809_n.jpg


Filled in a factory gap with weld and bondo ..

777515969_10240557709978827_7336961580585385320_n.jpg



Shot epoxy primer ..

d776ea12-85fb-48f3-902f-4632bd3a36e8.jpg


Real close to lading on the color ..

Did shoot color on the underside of the sun visor ..

503f9456-8d50-43ba-b49f-16788a07a35f.jpg


2K Hot-Rod black should keep the glare down ..
The tinted windshield with a sunband built in should also help the cause ...

1656304787419.png



1620486384515.png
 
Well ...

Looks like I fell into doing up another PS pump for a friends body swap ..
He liked how my pump turned out that he asked me if I'd do his pump ..

424cedba-2bf6-4727-b5ec-bd2658525595 (1).jpg


I said 'Sure'

29ef544f-0e6b-4052-b9a7-c8dc05768b58.jpg


22a6cf9a-29f3-42ac-a9b2-18a5007c7ec3.jpg



40 Ford 1 ton on a 99 C-30 frame sporting a 454" Rat with a 700R4 ...
Looking like it'll make a nice Rat Rod ...
 
Speaking of power steering I bought a cooler awhile back, getting around to mounting it ..

34457c01-e376-4013-8161-a0ae60fcd25e.jpg


Best place is inside the frame rail next to the transmission ...

70b6448d-281d-47a4-99d1-0245a8ab5a86.jpg


Should cool the fluid well enough ..

Parts came in to finish assembly of the heads ..

d10dd97f-199a-46d0-8206-f63852c90800.jpg


f4cddc68-9be1-4db1-98e7-a0ebadcd4208.jpg


Soon to un-bage it ..
 
Last edited:
Going to internly balance the 500" motor, that move required a neutral balanced flexplate ..
I have a good Oem plate that has a weght welded on .. Was going to cut it off and use it, but decided to buy one instead .. This aftermarket plate is about .040" thicker than stock ..

9c63dd05-5f0e-4560-8ec9-01fd52a79881.jpg


Did get the power steering fluid cooler mounted inside the frame rail and plumbed ..

34457c01-e376-4013-8161-a0ae60fcd25e.jpg


Wasn't all that fond of the barb fittings that it came with, changed those out to AN push-locks ... That makes easier to service when the time comes ...

1794919828979.png


Also got a inline filter to plumb in ..

1794928237077.png


Another item I wasn't fond of was the low pressure return hose that came in the hydroboost fitting & hose kit ..

1794920362695.png


Most likey it wouldn't cause a problem, but I ordered Evil Energy hose that is made for hyd. fluid ...

1794921677218.png


Way overkill, has a 250 # working pressure, the return only has about 20/30 # ...
 

Attachments

  • 1794921148915.png
    1794921148915.png
    823 KB · Views: 3
Last edited:
Back
Top