Latest activity

  • C
    I tried calling and left you a message. Please call me at (405) 362-0856 Thanks!
  • Dougt
    Dougt replied to the thread Rear brake lock up.
    Will do, thanks.
  • FDChappie
    FDChappie replied to the thread Rear brake lock up.
    Loosen about 1 turn on each star wheel and give that a try.
  • Dougt
    Dougt replied to the thread Rear brake lock up.
    Thank you for your reply. They did not release after bleeding the left and right rear. This did work the last time the brakes locked...
  • int77345
    int77345 reacted to FDChappie's post in the thread Rear brake lock up with Like Like.
    Try opening a rear bleeder while the brakes are locked. If the release, it's a pressure build up. If not it's adjustment.
  • FDChappie
    FDChappie replied to the thread Rear brake lock up.
    Try opening a rear bleeder while the brakes are locked. If the release, it's a pressure build up. If not it's adjustment.
  • Dougt
    Dougt replied to the thread Rear brake lock up.
    Unfortunately, a new master cylinder and brake booster didn't solve the problem, (see above) and the rear brakes have locked up again. I...
    • Valve, WO Switch, Warning Assy.jpg
  • S
    SLCJ6 posted the thread Rallye Wheel in Wanted goods!.
    I am looking for one wheel. Condition of the paint does not matter but the wheel must be true and undamaged. I believe this wheel was...
    • MW36591 - Exterior View.jpg
    • MW36591 - Paper Label.jpg
    • MW36591 - Wheel Stamping.jpg
  • W
    Winchested reacted to Scout survivor's post in the thread steering bell connection with Like Like.
    Thanks @Jonas1ne. I wire wheeled the spline and with a small amount of grease, I was able to push it together (did require some muscle...
  • FDChappie
    FDChappie reacted to Scout survivor's post in the thread steering bell connection with Like Like.
    Thanks @Jonas1ne. I wire wheeled the spline and with a small amount of grease, I was able to push it together (did require some muscle...
  • S
    Scout survivor replied to the thread steering bell connection.
    Thanks @Jonas1ne. I wire wheeled the spline and with a small amount of grease, I was able to push it together (did require some muscle...
  • J
    Jonas1ne replied to the thread steering bell connection.
    I wouldn’t try to expand the bell joint. A 3/4-36 spline should slide onto the steering box spline without having to spread or deform...
  • int77345
    int77345 reacted to EM3868's post in the thread Universal Joint with Like Like.
    To all who replied to my question offering tips, I just wanted to follow up follow up - after looking the situation over again this AM I...
  • Belzer65D1100
    Belzer65D1100 replied to the thread Antenna anyone?.
    Thanks for the info
  • Scoutboy74
    Scoutboy74 replied to the thread Antenna anyone?.
    Without seeing the exact thing you're dealing with, I'll be spitballing. Usually antennas must be taken apart so that the base portion...
Back
Top