Work day/Walnut Creek/Swap/May 14

S

scoutdude80

Moderator
.


___________________________________
IH work day
• the 3rd annual May workday will be Saturday, May 14.
• co-hosting will be cliff at diablo offroad and performance in walnut creek, who will open up his shop to us for the day. This is certainly an upgrade for us to be linked with diablo.
• you will still bring all your tools and equipment needed for the day, but for the most part we will have access to the shop’s facilities. Details of this will be posted up later on.
• doors will probably open by 9:00.
• plenty of work room.
• bring your e-zup’s
• byodrinks and munchies.
• lunch - consumption of mass quantities. We will ignite the flame pit and char some mammal flesh. [ 1 ]
• please post up if you are planning on coming so we can buy the right about of food.
• start planning and post up your wants & need-to's.


___________________________________
IH swap meet
• post up what you have to get rid of.


___________________________________
Diablo offroad and performance
1275 pine st
walnut creek, CA 94596
(925) 937-3627

cliff parking lot.jpg











[ 1 - prymaat conehead]
 
Last edited:
Re: Work day/Swap Meet May 14th

I'll be there with my Scout.

I will bring:
chop saw
bender (1.75" die)
grinder
stuff for bbq.

There will be at least 1 welder on sight, air for air tools, & a portable bandsaw (if you plan to use these, cliff likes bud & coors light.)

the shop on the other half of his building is empty. There is room in there for 4-5 rigs as well.
 
Last edited:
I will be there,parts: (Dana 60 rearend/ 3.54 gears/61 inches wms to wms/ 5 bolt Scout/Ford/Jeep bolt pattern). Lots of misc. Small parts, auto shifters, front drive shafts, 2 barrel carbs, Dana 20 transfercase (auto), engine brackets, factory step bumper with trailer hitch, chrome front bumper with chrome grill guard, full size Chevy Dana 44 all set up for Scout spring over with 3.73 gears, tailgate, inner hardtop panels, doors, let me know what you need I May have it.
Scout II parts.

Bill
fairfield
707-426-1632
 
Last edited:
I'm going to be there, and May need to install 4.27 gears. Once my 4.27 gears are installed I'll have 4.10 gears to swap. Also Scout II length tie rod, and Scout 80 length tie rod - both for GM tr ends. Also have a s80 custom rear bumper I can bring if anyone is interested.
 
Hey bill, is that inner and outer shafts both sides for 350? Im 15 minutes from u in vallejo and can get them whenever. Thx.
 
I'll take the morning off and join you for the day. I'll bring the service truck and whatever bits ans pieces I have extra.
 
How late you fellas think you will be working? Im going to be busy till 1230 but can make it by 115 or so.

Joe m
 
Stacys Dad Joe here I plan on making it . If any one has any projects (welding / fab ) for me or material request , please post up . So I know what to bring. Cary will I need to bring welding machines is there 220 power ?
 
Looking forward to it.

Was wondering if anybody would be willing to lend me a hand in installing new gears and an aussie locker in my front d44. I can do the dirty work, but want to make sure it's done perfect to the right tolerances and don't have any experience. Many beers, appreciation, and your pick of my spare parts if you have the tools and the know how to help!

Either way looking forward to seeing y'all, and have the following if anyone is interested:
- custom s80/800 rear bumper with 2 inch receiver hitch, pro construction with side protection too
- hd stainless steel tie rod/drag link threaded sii length
- hd tie rod/drag link threaded s80 length
- s80 front driveshaft for SOA
- IH only heavy duty u bolt spring plates
- rancho 9000 and 5000 shocks (2 of each)
- 4.10 gears (once my 4.27's are installed)
- s 80/800 rear bumper - basic 2x2
- raptor liner spray on bedliner - stuff is awesome, and includes spray applicator you just hook up to a compressor: raptor liner done!! - jeepforum.com
 
Im going to try and stop by for a couple of hours. I have a complete black kayline soft top with hardware that ill bring.
 
castle said:
im going to try and stop by for a couple of hours. I have a complete black kayline soft top with hardware that ill bring.
Click to expand...

What you looking to get for the top. I have a pal thats very interested in getting one 2nd hand.

Joe
 
I would like to get $400 for the top but not against a trade. I don't have anything specific in mind for a trade but im open to parts. Ive got pictures if necessary. Thanks.
 
I have a auto tranny out of a 74p/u if any1 is interested maybe marty? I could use a transfer case mount if any1 that is not cracked
 
You must log in or register to reply here.
Back
Top