Work Day/Swap Meet Sat May 15

S

scoutdude80

Moderator
work day #2 / Saturday, May 15 / 8:00 am
Same place as last year - at the shop. 210 san jose ave san jose 95125


• it's basically a service – tune-up – minor fabrication day for your truck. Get it ready for summer driving. Should be a good turnout if its anything like last year. There will be many knowledgeable IH people to answer questions and help diagnose problems. Carburetion is one area.

• swap meet. Gonna get started early on this. Post up your stuff.

• order your IH related parts from Jeff.

• buy your general parts before hand. Just a reminder stacy…

• bring your ezup’s. Need more shade.

• lunch – bbq? Last year we sent out for burritos.



a few pics from last year
driveway2.jpg
rick-ang.jpg
weld.jpg
keith.jpg
marty-bill.jpg
rick2.jpg
lunch.jpg
 
It's on my calendar.

My son has an 8:30-10:30 baseball game, so I should be there just in time for lunch.:gringrin:

I have the following tools... Let me know if you need me to bring any:
220 mig
chop saw
grinder (bringing it anyways).
Oxy/acet torch set
tube bender (only have a die for 1.75"... If you need another size, I don't mind if you buy me a die... :winky:)
ball joint/u-joint press (hand held)
bfh
 
I'm looking forward to it! My 80 could use some carb fine tuning. Assuming that cutting and turning Dana 44's would be too much for one day?
 
I'm looking forward to it! My 80 could use some carb fine tuning advice. Assuming that cutting and turning Dana 44's would be too much for one day?
 
kingkonger708 said:
I'm looking forward to it! My 80 could use some carb fine tuning advice. Assuming that cutting and turning Dana 44's would be too much for one day?
Click to expand...

Cutting and turning it doesn't take too long, as long as you aren't planning on driving home on it. All the little things that go into the SOA are what takes more than a day. The cut and turn is relatively simple.
 
Stacy will be with out Scout until his bail & fees are repaid. :icon_crying:we are still planing on making the work day any how. I can supply 220 stick & tig welder 110 wire welder & most metal fab tools. I also have access to most types of steel. Please post up wants & needs early so I can prepare.
 
Joe,

bring your 220v welder and I will have some d-rings and other misc. Welding I would love to have done on the cheese :icon_cool:

thanks,
c-
 
Gonna do my best to be there have the transmission torn out right now and waiting to order some parts. Trying to have it all ready for barret in June.
 
Back to the top.

I have a few items for the swap meet.

3 inch body lift set (angela has first dibs).
Distributer out of 75 Scout with a burnt up petronix. No cap.
2 barrel Holley carb.
Scout II back seat. Dark plaid with cloth with brown pleather around back. (ill see if I can get a photo if any ones interested).
Stock shifter cable, purchased new but never used.
 
60 40 bench seat no lower pad, frigidking ac unit free, tailgate a set of IH big rig style side mirrors 2bbl holly 2bbl intake for 345

would we have the time to adj my ring and pinon? The rearend play is pissing me off

0213001123.jpg

0104001230.jpg
 
Last edited:
I have 2 stock fronts seats and a t18 if anyone is interested. Need a radiator if anyone has a spare. That I could buy. The seats are out of a 800B.
 
I will be bringing lots of small knick-knacks to sell:
d44 stubs, spindles, locking hub, etc. Etc.
Edelbrock 600 carb w/electric choke (offroad springs, several sets of jets)


I have some big stuff if anyone is interested:
4 hummer h1 wheels (8 bolt) original bs
7 BFG 35"x15" muds on 6 lug-lots to no tread, good to bad shape, 2 have tubes.
Np203 rangebox with 32 spline input
rear waggy axle shafts
27 spline 9" shafts
 
You must log in or register to reply here.
Back
Top