Work Day/Swap Meet Sat May 15

Ive got 4 38 inch tires that go on 15 inch rims. The midle of 2 of them are almost balled from what looks like over inflashione but the rest of the tires have like an inch of tread left the other 2 have about a quarter inch left in the middle but the rest has about an inch.

These tires are fearly new an maybe been wheeled once so they have no cracks or cuts on the side walls. I am willing to sell or trade
 
orng blsm spcl said:
ive got 4 38 inch tires that go on 15 inch rims. The midle of 2 of them are almost balled from what looks like over inflashione but the rest of the tires have like an inch of tread left the other 2 have about a quarter inch left in the middle but the rest has about an inch.

These tires are fearly new an maybe been wheeled once so they have no cracks or cuts on the side walls. I am willing to sell or trade
Click to expand...

Price?
 
orng blsm spcl said:
stacy will be with out Scout until his bail & fees are repaid. :icon_crying:we are still planing on making the work day any how. I can supply 220 stick & tig welder 110 wire welder & most metal fab tools. I also have access to most types of steel. Please post up wants & needs early so I can prepare.
Click to expand...

Joe, if you can get a some 5/16's plate I know a few of us are starting on cages and could use some for the foot plates.
 
Last edited:
mochamike said:
are you going to be getting any more?

I need some 1.5" .25 wall dom for steering stuff.
Click to expand...

I think it was just the order of 1.5" .120 wall dom for cage stuff. We ordered something like 700' so we got a smokin' deal.
When I bought 1.5" .25" wall dom for my tierod and draglink when I did my axle swap, I ended up going through polyperformance since it was cheaper to have it shipped than get it locally. Still was like $12 a foot though.
 
Let me know what's needed parts wise. I have cardboard boxes of small parts,smog tubes, engine brackets, a Dana 20 transfercase, a new twin stick for a Dana 300, stock bumpers,chrome grill guard, a rear step bumper/with hitch, etc, etc.


Bill
707-426-1632
 
Trying to switch my work schedule around to make this.

There a guy in chico that has a complete 4" lift kit for $200
the spring are rancho and look new. He is unemployed so he is selling off a few things. Pm me if you want his number.
He as a Scout II hood that he would sell dirt cheap. Nice guy.
He gave me a Scout top, dented door and few other items.

Cheese I will try and remember to bring the 4.5" dewalt plasma cutter to get those d rings mount properly.

Silver Scout, you want me to bring the drivelines? Any other items? I think you wanted a d20?

I have a box of small stuff too, like gauges and what not. Let me know if anybody needs or wants some of these items. I guess I should take a picture
 
Quote: "cheese I will try and remember to bring the 4.5" dewalt plasma cutter to get those d rings mount properly"

that would be great!

All, I have a lot of stuff lying around as well if anyone is looking for anything post up and I'll take a look!

I have four 35 x 12.5 x 15 tires on 5 on 5.5 15x8 rims for free!

They are not streetable tires, but good for mock up or rolling around the project.

Sean, bring the shifter cable I'll give you some $$ for it.

C-
 
235frog said:
I think it was just the order of 1.5" .120 wall dom for cage stuff. We ordered something like 700' so we got a smokin' deal.
When I bought 1.5" .25" wall dom for my tierod and draglink when I did my axle swap, I ended up going through polyperformance since it was cheaper to have it shipped than get it locally. Still was like $12 a foot though.
Click to expand...

Anything offroad in san leandro got my 10ft @ $8.50/ft.
 
I will bring my grinder & a bfh.

If anyone would like me to bring the following tools, let me know:

1.75 tube bender
oxy/ace torch
220v mig welder
chop saw
sawzawl
u-joint press (hand held/large c style)
 
Planning on making it ,wiil bring 220 welder,wire welder, metal cutting saws,grinders. We are limmited for space as the Scout is on house arrest. As for 5/16 plt is 6" wide good or I can get sheet & cut any size. Silver Scout what typ of plt do you need?
 
5/16 is a bit thick for most projects, Joe got any 1/4 or 3/16 scraps?
I know IH stands for its heavy, but a pound saved is a pound earned. Plus you can drill a hole in 3/16 a lot faster. 1/8 plate is handy for cage work too. It's nice to weld a small patch to the frame and then weld the tube to that.

Do we have access to a drill press? To add cage feet you need to bolt a top plate to the bottom plate. Unless your thinking of a different way. If you need some bushings let me know asap. These work great to isolate cages while keeping the body bushings. .

bushings 9.99
http://www.wfoconcepts.com/uploads/productimages/wfo4250kitc%20300x225.jpg[/img ]

Jeff has these cage feet for $5 each

[img]http://www.IHPartsAmerica.com/store/graphics/00000001/img_0340_2.jpg
 
Last edited:
orng blsm spcl said:
silver Scout what typ of plt do you need?
Click to expand...

I need plate to cover up the cracks in my frame. The ones that I got from slick rock last summer. 1/4? Or should I use 5/16th?

attachment.php

attachment.php
 

Attachments

  • headshot 002.jpg
    headshot 002.jpg
    211.8 KB · Views: 492
  • headshot 004.jpg
    headshot 004.jpg
    34 KB · Views: 487
You must log in or register to reply here.
Back
Top