Jesse Stewart Active member Feb 4, 2026 #302 Speedmaster 4340 4-1/4" Stroke Forged Steel .. Without a doubt will handle all the ponies this motor will make ..
Speedmaster 4340 4-1/4" Stroke Forged Steel .. Without a doubt will handle all the ponies this motor will make ..
Jesse Stewart Active member Feb 4, 2026 #304 Two doors down from my shop has a dyno ... They want to see the numbers, told them I would after a 1,000 miles been put on ..
Two doors down from my shop has a dyno ... They want to see the numbers, told them I would after a 1,000 miles been put on ..
Jesse Stewart Active member Feb 26, 2026 #306 Soon to make some sound .. Homemade run stand was once a Chevy powered generator ..
Jesse Stewart Active member Feb 27, 2026 #308 FDChappie said: Would you make a video so we can hear it? Click to expand... Sure ....
Jesse Stewart Active member Feb 27, 2026 #309 Making some progress on the run stand .. Like these better than the Sea Ray gauges .. Locating used parts is going well . The pile is growing .. Used fans moves air really good ... Was going to use a fuel tank that was on a motorhome for a generator, but it was huge and would had been hard to mount ... Doing a Moon tank instead .. Last edited: Mar 1, 2026
Making some progress on the run stand .. Like these better than the Sea Ray gauges .. Locating used parts is going well . The pile is growing .. Used fans moves air really good ... Was going to use a fuel tank that was on a motorhome for a generator, but it was huge and would had been hard to mount ... Doing a Moon tank instead ..
Jesse Stewart Active member Mar 3, 2026 #310 Waiting for ordered parts to show up .. Soon to make some noise ...
FDChappie Well-known member Mar 3, 2026 #311 Nice remote throttle setup. Used to use a lot of them on fire engines.
Jesse Stewart Active member Mar 6, 2026 #312 Making good progress .. Installing the shorty headers is becoming a problem .. Motor mounts are in the way .. Might have a cure coming ?? Soon to give em a try ..
Making good progress .. Installing the shorty headers is becoming a problem .. Motor mounts are in the way .. Might have a cure coming ?? Soon to give em a try ..
Jesse Stewart Active member Mar 13, 2026 #314 Got to install mufflers, I do want to hear the motor running ...
Jesse Stewart Active member Mar 14, 2026 #316 Panel is almost on .. Wiring and throttle cable is next to do ...
Jesse Stewart Active member Mar 27, 2026 #317 71 Travelall is for sale ,,, ... $38,000 ... Could be yours ..
Jesse Stewart Active member Thursday at 4:40 PM #318 Married the strut rods to the boat motor oil pan ... Might help with keeping things from breaking .. Another item is on the wish list that will most likely be helpful with handling the herd of horses .. Ladder Bars .. Last edited: Sunday at 12:54 PM
Married the strut rods to the boat motor oil pan ... Might help with keeping things from breaking .. Another item is on the wish list that will most likely be helpful with handling the herd of horses .. Ladder Bars ..
Jesse Stewart Active member Yesterday at 9:03 PM #319 Did a bit of work .. Starter support bracket is on .. Don't sound like it was much of a job to install the brace .. Although it took a while to do .. Seems that GM changed the bolt size on the last of the Mark IV's for whatever reason ? ( Wonder why they did that move ? )
Did a bit of work .. Starter support bracket is on .. Don't sound like it was much of a job to install the brace .. Although it took a while to do .. Seems that GM changed the bolt size on the last of the Mark IV's for whatever reason ? ( Wonder why they did that move ? )