Latest activity

  • P
    PAscout800 replied to the thread Drum brake standstill.
    Good feedback and I appreciate that. I just ordered all new rubber hoses and also the little hardlines up front. I’ll take your advice...
  • W
    Winchested replied to the thread Blown Head Gasket?.
    Pre-oil it properly, via the distributer drive and slowly roll the engine over by hand until you see oil at both rocker stands, the...
  • W
    Winchested replied to the thread Maybe the wrong fuel filter?.
    Yes normal as you have it mounted vertically. The filter media wicks up the fuel.
  • ihpartsjeff
    ihpartsjeff replied to the thread Super stubborn brake drum.
    A brake drum swedge cutter tool. Brake Drum Swedge Cutter A deep holesaw also works.
  • W
    Winchested reacted to InterFord's post in the thread Tie rod help. with Like Like.
    Jeff I did reach out to your parts department and talked with Mike. Even though he hadn't gotten his second cup of coffee he was able to...
  • W
    Winchested replied to the thread Drum brake standstill.
    Does it have a combination valve with brake warning shuttle valve? Start undoing lines 1 at a time starting between the master, and the...
  • ihpartsjeff
    ihpartsjeff replied to the thread 1959 B120 4x4 Travelall.
    I'm not sure if the current owner is a member. I did just see this Travelall out in Springfield, Ohio at the Nationals show so it is...
  • P
    Hey everyone. Got the engine running and carb rebuilt, now on to the brakes. I bled the master cylinder (still a little soft but had...
  • I
    InterFord replied to the thread Tie rod help..
    Jeff I did reach out to your parts department and talked with Mike. Even though he hadn't gotten his second cup of coffee he was able to...
  • int77345
    int77345 replied to the thread Maybe the wrong fuel filter?.
    yes the fuel level is normal, i ran one for years, and on hot days at high elevation the filter would even be empty, they a surge...
  • Scoutboy74
    Scoutboy74 replied to the thread Maybe the wrong fuel filter?.
    Is the filter installed in the proper flow orientation? There is a definite inlet and outlet. The level in the filter will fluctuate...
  • T
    terracottascoutii replied to the thread Blown Head Gasket?.
    That may be the best and simplest answer. I just don't want to lose my trail of efforts and cause much harm to my Scout. I appreciate...
  • A
    I was looking at my clear fuel filter and wondering if this is normal or wrong? Video saved here...
  • Belzer65D1100
    Belzer65D1100 replied to the thread Super stubborn brake drum.
    What would be the best way to unswedge it?
  • Z
    Zaedster replied to the thread Super stubborn brake drum.
    The studs are swedged to the drum through the hub.
Back
Top