Planing on switching our 62' c110 with a 345 to fuel injection. Truck is 2wd with a 2bbl intake currently. I have a 4bbl cast iron intake on a spare 392 sitting in the garage. Would switching to the 4bbl intake make any difference in performance for the fuel injection? The 345 is a fresh stock rebuild. Truck will be used for daily driver.
which intake
- Thread starter Cudamank
- Start date
Bill USN-1
F.I. Moderator
If the manifold was already off then I would say use the 4bbl. But if the 2bbl manifold is on and it's going to be a dd and not a tow rig, then the 2bbl manifold is fine.