Where to BUY a Fuel Injection Kit

ihpartsjeff

ihpartsjeff

Administrator & Owner
Staff member
IH Parts America is proud to be a reseller of hamilton fuel injection kits.

These throttle body fuel injection or TBI systems are configured for the most economical way to replace that old carburetor. Provides great starts, drivability, and fuel economy.

Hamilton fuel injection uses the highest quality thin wall high temperature wire available today. Their harnesses are built with full protection from the elements using state of the art weatherpak connectors. All harnesses have a very simple 3 wire hook up (battery, ignition and ground) plus efi items , also includes a power and fuel pump relay.

This system includes a complete TBI conversion plus a custom efi distributor for complete fuel and spark control.


Included with every kit is an aldl usb port type data logging cable and data logging program. Makes trouble diagnosis or data logging a breeze.

This is what you will receive with your fuel injection kit:
- custom built efi distributor
- rebuilt TBI unit
- ECM (GM production)
- complete wiring harness
- specially calibrated chip
- adapter plate, gaskets, hardware
- external electric fuel pump with filter
- fuel pump relay
- power relay
- coolant sensor
- map sensor
- o2 sensor
- check engine light indicator
- installation instructions
- aldl data logging cable and data logging program
- tech support
- many miles of low maintenance fuel injection operation


for more information and ordering visit our online store - complete TBI fuel injection system for your IH pickup, Scout, Travelall or even loadstar - IH Parts America

hfi%20system-med.jpg
 
Last edited:
Will this kit work on a gen 1 sbc? I currently have an 350 with an edlebrock performer intake and a 600 cfm from your shop.

Thanks
c
 
I would to buy one of these Hamilton kits but can't find them? Anyone know of a source? I have a 1961 C110 with a 266V8
 
pigpen said:
I would to buy one of these Hamilton kits but can't find them? Anyone know of a source? I have a 1961 C110 with a 266V8
Click to expand...
I'm backlogged right now but can supply a diy kit so you can just pick up the over the counter parts to complete system.
Saves you money if you're a diy'r.
 
pigpen said:
I would to buy one of these Hamilton kits but can't find them? Anyone know of a source? I have a 1961 C110 with a 266V8
Click to expand...

We have a couple used systems at IH Parts America. Call us at 530-274-1795 and ask for me.
 
Looking to add a 304 4V manifold to my old 62 Travelall. I was going to top her off with a Holley 390 or 470 with added electric choke to avoid staving the little gal of air with a bigger CFM carburetor. Wondering if there is a EFI that would pair with the 4v manifold?
 
The Sniper 2 would pair well. We don't have one listed on our online store but our parts department can source one for you.
 
You must log in or register to reply here.
Back
Top