I have a 71 Scout two and bought a 78 parts scout for the disk brakes. I don't want to swap axles because I would rather have the gearing of the 71 so I'm just swapping the disks for the drums. I took the hub off, bearings, brakes etc off of both scouts but the 78 has an 8 bolt pattern and the 71 has a 6 bolt pattern (the part that holds the drum or disk brakes on to the axle). I was told they would swap but it's not looking that way. My question is this, can I swap the entire steering knuckle? Remove the tie rods, etc and swap the entire unit?
Thanks,
Thanks,