jetfxr
Member
Ok time for an update, the tera is complete except for the quarter panel, I have a trucker buddy that has it in msp. I did find an nos tera replacement and when Tom can get a load this way I will finish the tera up. For an update on it, I replaced bout doors with rust free doors, I replaced the windshield frame with a rust free unit, and I went ahead and replaced both front fenders with rust free units I scrounged up here. I went ahead and replaced the grill and lower valance also. I had my upholstery guy recover the seats and door panels, he found the same plaid cloth that was used on the seats when they were new. Happy to report I have all new weather striping and stripes from Jeff earlier than needed as usual. Hoping to get this one rapped up and down the road soon
here is a picture of the new rockers always had an issue with using used ones on a new motor. I have to re size pictures to post them here. I have posted motor pictures over on the pirate board also. I will be resizing the pictures as I get a chance, but I have just installed the motor, finishing up the plumbing a bitch because there is so much to deal with, I am doing all new lines. The Scout has hydro boost, and ram asst. Steering, with a filter and cooler on the power steering circuit. I had all steel braided lines but they had been on there for some years and the broken strains were hard to deal with, you would get poked reaching around the engine.
