Servicing a T-28 Transmission / Borg Warner Model 8 Transmission

dmf6978 said:
Could an admin maybe fix this forum post topic, because when I load the page none of these photos are showing up. I think this entire thread pertains to what I need help with and the photos will be very good to see.
Click to expand...
The original poster probably used some third party host for the pics instead of uploading them directly to the forum website. It might be up to him to fix, if he's still around.
 
Hey dmf6978,

Got your PM. Yes, I believe this is the gasket..

10728/1 Pan Gasket | Moss Motors

10728/1 Pan Gasket|Pan Gasket
xks.com xks.com

We had difficult with leaks as well, even with the correct gasket. So what we did was clean all surfaces on the pan and tranny. Perfectly dry and clean. Then ran a 1/8th" bead of the black RTV around both the pan and tranny. Waited for it to dry to the touch...so not tacky, but not hardened. Then sandwiched the gasket in between those and bolted. Bolted just barely hand tight.
Been running the truck and no leaks!!!

Thanks for the kind words. Hopefully the photos can be put back up, if not then I have them saved somewhere. I will have to see what admin says.
* ah, just saw his reply. The site has changed so now I need to figure how to get the photos back up.

Craig
 
dmf6978 said:
Could an admin maybe fix this forum post topic, because when I load the page none of these photos are showing up. I think this entire thread pertains to what I need help with and the photos will be very good to see.
Click to expand...
Nothing an Admin can do. The person who originally posted these pictures needs to fix their links.
 
Thank you for your patience. I finally got all the pics back into the thread.
I still have the Travelall, but don't get to drive it as much as it deserves.
Happy New Year
 
You must log in or register to reply here.
Back
Top