jeff campbell
Active member
I've gotta v8 80 Scout 3-spd,I want to swap in a t-19 d-20,I picked up cheap.,4 speed.I'd like to know if anyone has done this before,will it fit ? Just throwing out a feeler is all.thx--Jeff
Scout 80 T18 Four Speed Swaperoo
- Thread starter Michael Mayben
- Start date
Here is my 1962 Scout 80 4wd 152 hydra clutch converted to a t18 4spd with d-18 in a d-20 case for od.
All components are stock IH 80/800 parts but the m/c used is from wilwood; something like a .68 bore and said to be a stock replacement. (same bolt pattern & stroke)
most of the fab work was done by jared (pyro3256) but I thought moving everything over to the passenger side would be best. So far everything works great.
The throw out arm still needs to be trimmed but you get the idea.
All components are stock IH 80/800 parts but the m/c used is from wilwood; something like a .68 bore and said to be a stock replacement. (same bolt pattern & stroke)
most of the fab work was done by jared (pyro3256) but I thought moving everything over to the passenger side would be best. So far everything works great.
The throw out arm still needs to be trimmed but you get the idea.
