PROJECT HOJ (HUNK OF JUNK)

[nico9]

so this is my 1971 800B International Scout. It was completely stock. Have only had it for a month and made a whole bunch of changes, so let me know what you think and any ideas that might help me get her on the road sooner thanks!!!

Front axle stock Dana 30 yuck


Behind shot with no rear axle, trying to grind off all old welds from frame.


Trying to line up the rear axle. This rear axle that we are installing is a Chevy 12 bolt with 456 gears and a mini spool.


Diff. Angle of same thing


Rear axle now in place


Off with the front axle


Picture of the front with no axle


Another view of front axle


Front axle only c-clamped in


Top view of power steering pump


Piece of the radiator shroud that we made


The plate and weld that we attached to the frame for the power steering pump


Side view of power steering. The power steering is out of a Scout 2 seeings how the 800B didnt come with power steering.


Here we took off the cab and put in the roll cage


Diff angle of the Scout topless and new roll cage


Drivers side view of samething, the front axle is a Dana 44 with 456 gears and locking hubs

 

[ihpartsjeff]

Moved your thread to the appropriate area. Nice looking Scout. Good luck with your project.

 

[Michael Dimock]

Nice! Have you done anything about caster (cut and turn) on the front axle or is it ok driving? Good luck on your new project!

 

[nico9]

No actually we drove up to medford area for this axle because the it was already set up for the Scout so we got lucky with that

 

[nico9]

Haven't updated in a while, because nothing has been picture worthy. So thought I would just tell everyone. We have put in the new master cylinder as well as bled the brakes. Got the roll cage bolted down as well as put herculiner throughout the whole interior. Now just waiting for a new power steering pump because the last one in the pic didn't work.
Ill keep u up dated.