Preorders for Binder Bee

[ihpartsjeff]

Anyone wanting any parts in particular brought up to the show should let me know right away. With our ever growing product line its difficult to bring up everything that we have so its best to order ahead of time.

Thanks for your continued support and I look forward to seeing all my good friends next week.

 

[Michael Dimock]

If you could bring up a pair of partsmike Dana 44 1" high steer spacers, then we could work out the trade of my too short 1/2" spacers. Hopefully, my Dana 44's will then get 1 step closer to completion...

 

[Drew Merrick]

I am calling you in 10 minutes for a set of the 152 '80 engine mounts.

 

[ihpartsjeff]

if you could bring up a pair of partsmike Dana 44 1" high steer spacers, then we could work out the trade of my too short 1/2" spacers. Hopefully, my Dana 44's will then get 1 step closer to completion...

Sounds good michael.

I am calling you in 10 minutes for a set of the 152 '80 engine mounts.

Thanks for the order drew.

 

[Scoutboy74]

Jeff, hooty's been thirsting for some of the good stuff. Can you bring a case of swepco 306 in 20 dubya fitty weight? I'll call momentarily to place the order. Thanks!

 

[ihpartsjeff]

Thanks for the order trever.

 

[Likeke's Scout]

Hi...can you bring up a egr block plate and gasket....also, a locking gas cap...for a 74 scoutii 345cid

thanks
richard johnson

 

[ihpartsjeff]

hi...can you bring up a egr block plate and gasket....also, a locking gas cap...for a 74 scoutii 345cid

thanks
richard johnson

Will do richard.

 

[SS2]

I'm going to need a set of late model taillights for sure and I'm still taking inventory...

 

[Drew Merrick]

Bring a few bottles of swepco up for me. I will give you a call to finalize.

 

[Michael Mayben]

Do we need to lay in a swepco dino juice supply here at ihon more norther??? Bring dick up to the bee too with a trailer load of swepco!

Don't worry about me tappin' it, the shit is too nice for my crap!

 

[ihpartsjeff]

Last call. I'm packing orders tomorrow so I need to know asap if anyone needs anything else.

 

[Major Screwup]

last call. I'm packing orders tomorrow so I need to know asap if anyone needs anything else.

8" steering ram, but you already know this.

 

[ihpartsjeff]

8" steering ram, but you already know this.

Psc still hasn't delivered so hopefully tomorrow.

 

[Michael Dimock]

Hey Jeff, do you have any of the plastic clip on pieces that secures the lock rod into it's hole in the metal tab in the door? This is for a 72 travelette if this makes a difference. It is a white plastic and upon taking the door apart to find out why my lock rod was just sitting in there loosely instead of being attached I found it broken. Let me know if you have one. Thanks

 

[ihpartsjeff]

hey Jeff, do you have any of the plastic clip on pieces that secures the lock rod into it's hole in the metal tab in the door? This is for a 72 travelette if this makes a difference. It is a white plastic and upon taking the door apart to find out why my lock rod was just sitting in there loosely instead of being attached I found it broken. Let me know if you have one. Thanks

Sorry but I won't have time to look for this before I leave.

I'm starting to pack orders now. Absolute last call on preorders.

Terry - the ram showed up this morning so I will be bringing that up with me.

 

[Major Screwup]

]
Terry - the ram showed up this morning so I will be bringing that up with me.

Nice!

 

[ihpartsjeff]

nice!

Just to verify you want the ram only(no hose kit)?

 

[Major Screwup]

just to verify you want the ram only(no hose kit)?

If you have room throw it in. If it looks like it'll work then I'll get it also.