wagonwheel
Member
Reply
parting out late 60s 1200
- Thread starter wagonwheel
- Start date
- Status
wagonwheel
Member
If overdrivesteve doesnt come through I can sell you some of those parts
will have to check on others
wagonwheel
Member
Sorry carb was missing
wagonwheel
Member
Overdrive steve do you want this stuff or not?
Gonna sell it to someone else if you dont respond
Gonna sell it to someone else if you dont respond
overdrivesteve
Member
Hi, just trying to understand and confirm...
Yes I did state I no longer needed the pedal assembly, then I asked for the price on only the steering column and visors. You replied $80 shipped. I then asked if the deposit applies to this price. You then replied:
If the money went to paying for those other parts, shouldn't they be included, otherwise whoever you sell them to should pay for their removal (gas, time) and my deposit apply only to the parts I'm actually purchasing? That seems fair to me, especially since it took you 6 months to pull the parts.
Regardless, I guess we all live and learn. Ok, never again will I send someone a pre-pulling parts deposit, and for $80 more I'll buy just the steering column assembly you have pictured with the two visors you have pictured, if its complete and mechanically working properly. By mechanically working properly I mean is the horn button a little springy and does the turn signal lever cancel out when you turn the steering wheel?
And very important, and the conclusion of this drawn-out transaction depends on it, I do not want the steering wheel, horn button, turn signal lever, or any other part disassembled from the steering column assembly. It must be shipped complete and assembled as shown in your pictures. If you have already pulled the steering wheel from the column for some reason, then this entire transaction is cancelled.
I have bought similar steering column assemblies in the past and every time the sender decides its easier to remove the steering wheel before shipping. And every time, without exception, they break and lose parts. I know you're a better mechanic and probably would not break or lose parts, but it's my money and I don't want to take that risk again.
So am I very, very clear on this point - nothing is to be disassembled, and do you agree to ship the steering wheel/column assembly fully assembled as shown in your pictures below?
I understand the column is dented a little. I've seen pictures of other steering columns and they were dented too if they came from a '68 pickup with a factory 4 speed. Seems to just be a '68 pickup only IH thing unless the column has shifter linkage going through it.
I'd like to see one more picture of it in its shipping box before you seal it shut. Then we can decide the best way for me to pay you the additional $80. I'm thinking perhaps ebay's paypal?
The next move is yours as I have agreed to pay $80 more if its assembled and mechanically operational, and I'm waiting for your picture of it in its shipping box.
I wish you a great holidays.
Steve
.
.
http://forums.IHPartsAmerica.com/attachments/parts-sale/23479d1387220143-parting-out-late-60s-1200-img_20131029_153129.jpg[/img ]
.
Yes I did state I no longer needed the pedal assembly, then I asked for the price on only the steering column and visors. You replied $80 shipped. I then asked if the deposit applies to this price. You then replied:
If the money went to paying for those other parts, shouldn't they be included, otherwise whoever you sell them to should pay for their removal (gas, time) and my deposit apply only to the parts I'm actually purchasing? That seems fair to me, especially since it took you 6 months to pull the parts.
Regardless, I guess we all live and learn. Ok, never again will I send someone a pre-pulling parts deposit, and for $80 more I'll buy just the steering column assembly you have pictured with the two visors you have pictured, if its complete and mechanically working properly. By mechanically working properly I mean is the horn button a little springy and does the turn signal lever cancel out when you turn the steering wheel?
And very important, and the conclusion of this drawn-out transaction depends on it, I do not want the steering wheel, horn button, turn signal lever, or any other part disassembled from the steering column assembly. It must be shipped complete and assembled as shown in your pictures. If you have already pulled the steering wheel from the column for some reason, then this entire transaction is cancelled.
I have bought similar steering column assemblies in the past and every time the sender decides its easier to remove the steering wheel before shipping. And every time, without exception, they break and lose parts. I know you're a better mechanic and probably would not break or lose parts, but it's my money and I don't want to take that risk again.
So am I very, very clear on this point - nothing is to be disassembled, and do you agree to ship the steering wheel/column assembly fully assembled as shown in your pictures below?
I understand the column is dented a little. I've seen pictures of other steering columns and they were dented too if they came from a '68 pickup with a factory 4 speed. Seems to just be a '68 pickup only IH thing unless the column has shifter linkage going through it.
I'd like to see one more picture of it in its shipping box before you seal it shut. Then we can decide the best way for me to pay you the additional $80. I'm thinking perhaps ebay's paypal?
The next move is yours as I have agreed to pay $80 more if its assembled and mechanically operational, and I'm waiting for your picture of it in its shipping box.
I wish you a great holidays.
Steve
.
.
http://forums.IHPartsAmerica.com/attachments/parts-sale/23479d1387220143-parting-out-late-60s-1200-img_20131029_153129.jpg[/img ]
.
Attachments
Last edited:
wagonwheel
Member
Its I-beam with 8 lug
wagonwheel
Member
hi, just trying to understand and confirm...
Yes I did state I no longer needed the pedal assembly, then I asked for the price on only the steering column and visors. You replied $80 shipped. I then asked if the deposit applies to this price. You then replied:
if the money went to paying for those other parts, shouldn't they be included, otherwise whoever you sell them to should pay for their removal (gas, time) and my deposit apply only to the parts I'm actually purchasing? That seems fair to me, especially since it took you 6 months to pull the parts.
Regardless, I guess we all live and learn. Ok, never again will I send someone a pre-pulling parts deposit, and for $80 more I'll buy just the steering column assembly you have pictured with the two visors you have pictured, if its complete and mechanically working properly. By mechanically working properly I mean is the horn button a little springy and does the turn signal lever cancel out when you turn the steering wheel?
And very important, and the conclusion of this drawn-out transaction depends on it, I do not want the steering wheel, horn button, turn signal lever, or any other part disassembled from the steering column assembly. It must be shipped complete and assembled as shown in your pictures. If you have already pulled the steering wheel from the column for some reason, then this entire transaction is cancelled.
I have bought similar steering column assemblies in the past and every time the sender decides its easier to remove the steering wheel before shipping. And every time, without exception, they break and lose parts. I know you're a better mechanic and probably would not break or lose parts, but it's my money and I don't want to take that risk again.
So am I very, very clear on this point - nothing is to be disassembled, and do you agree to ship the steering wheel/column assembly fully assembled as shown in your pictures below?
I understand the column is dented a little. I've seen pictures of other steering columns and they were dented too if they came from a '68 pickup with a factory 4 speed. Seems to just be a '68 pickup only IH thing unless the column has shifter linkage going through it.
I'd like to see one more picture of it in its shipping box before you seal it shut. Then we can decide the best way for me to pay you the additional $80. I'm thinking perhaps ebay's paypal?
The next move is yours as I have agreed to pay $80 more if its assembled and mechanically operational, and I'm waiting for your picture of it in its shipping box.
I wish you a great holidays.
Steve
.
.
http://forums.IHPartsAmerica.com/attachments/parts-sale/23479d1387220143-parting-out-late-60s-1200-img_20131029_153129.jpg[/img ]
.[/quote ]
the money I paid for these parts is more then what you gave me for deposit so I am including it in final price
and to ship big box with proper packing for complete column with wheel aint gonna be cheap
so im expecting to lose money on this deal
not a problem to me
because of way we did it
column is as in picture still
no paypal
ihpartschad
IHPA General Manager
Ok gentlemen, this transaction needs to be concluded. I am going to close this thread as I am changing the rules of the parts for sale section because of this. Please move the finalization of this transaction to either email or pm. Thanks!
Moving forward you must list the specific part you have for sale and a price. No more taking requests and deposits for parts on this forum.
Furthermore, I would expect the two of you to resolve this without spilling over into other threads or areas of the forum. If that does not happen you both will be excused from the forum altogether.
Moving forward you must list the specific part you have for sale and a price. No more taking requests and deposits for parts on this forum.
Furthermore, I would expect the two of you to resolve this without spilling over into other threads or areas of the forum. If that does not happen you both will be excused from the forum altogether.
- Status