72 Scout II Project

Took the steering wheel and put it on my 74. Was hoping to use the turn signal switch but they're both shot. Will be ordering one soon from IHPA. Tore the dash out and was trying to use the wiring to help troubleshoot my 74. All I can say is, damn!!! IH must have gotten a hell of a deal on green wiring, lol. Also considering using this shifter in my 74 and putting it back in the stock location then reupholster the seats and use them in the 74 as well.
 

Attachments

  • image.jpg
    image.jpg
    86.1 KB · Views: 458
I used the door panels and hardware on my 74 as well as some of the trim nuts but didn't do a full door swap because there's a minor bit of cancer on both of them. This is the passenger door.
 

Attachments

  • image.jpg
    image.jpg
    28.5 KB · Views: 566
I haven't fooled with the driver side but, based on this passenger side, I'm going to have to go with the windshield frame being a total loss. If I feel froggy enough I might see what I can do with it but, a swap is going to be the easiest route at this point.
 

Attachments

  • image.jpg
    image.jpg
    93.8 KB · Views: 509
And I thought the window frame on my beast was bad. I say a total loss on the windshield frame ya got. Be cheaper in the long run to get a good used one. Too bad you aint near me out here in kalifunkia, I have a bare frame here that I got for my rolled Scout
 
You keep on bringing up CA and you're going to talk me into moving back out there! Not really but, it's a nice thought, lol. I wish there were more folks over this way that were into these rigs. I May end up having to buy a few more and have them shipped over here. Just the luck of the draw that I found both of these rigs.
 
Little razzing is all. Just in good fun. But I wasn't kidding about having a spare windshield frame, minus glass and hardware. Got it soon after I rolled my 74.

Btw - if you ever decide to visit cali for what ever reason, you be welcome to hang out in my cave.
 
The day I get either one of these rigs road worthy to my specs the first thing I'm doing is planning a road trip to come see ya scooter! Keep the razzing coming, it's part of the reason I feel at home here, lol. Not sure what freight would cost but, I May seriously take you up on that windshield frame.
 
So the sun went down on me while tinkering with my 74 so I headed into the shop where I had light. Didn't get much accomplished but, the driver door and fender are off now.
 

Attachments

  • image.jpg
    image.jpg
    70.8 KB · Views: 505
Didn't find anything exciting but I did notice something foul while pulling the fender which led to me investigating the busted washer fluid reservoir. Care to take a guess at what I found?
 

Attachments

  • image.jpg
    image.jpg
    51.7 KB · Views: 475
If you guessed something dead, you guessed right. Luckily it's still cold out here so it's not overwhelmingly foul. The wife called me in for dinner, chicken spaghetti, just in time! I'll deal with this tomorrow.
 

Attachments

  • image.jpg
    image.jpg
    23.7 KB · Views: 489
Mainly focused on getting the 74 road worthy right now so haven't done much more to this rig. I did manage to pull the radiator, transmission cooler, crossmember, passenger side wheel well, master cylinder/brake booster and various other items and wiring tonight. Oh, and I have come up with a name for her. In honor of our fallen friend that I found in the reservoir, she is now called mouse. I do not have any intentions of doing anything crazy to reflect the name though, lol!
 

Attachments

  • image.jpg
    image.jpg
    81.9 KB · Views: 428
Sheeit brother. You shore do know how to make a mess. So we wont be seeing a rat fink shifter in her anytime soon?

I say stuff the mouse and hang it from your rearview :smilewinkgrin:

so is this the future recipeint of the idi? You're movin so fast now im gettin confused. Makin my damn head spin and motivatin me at the same time.

Also. Any chances of mouse soup any time soon?
 
sheeit brother. You shore do know how to make a mess. So we wont be seeing a rat fink shifter in her anytime soon?

I say stuff the mouse and hang it from your rearview :smilewinkgrin:

so is this the future recipeint of the idi? You're movin so fast now im gettin confused. Makin my damn head spin and motivatin me at the same time.

Also. Any chances of mouse soup any time soon?

Rofl, motivation is a good thing and yes, I'm damn good at makin messes! Just ask my wife.:icon_mrgreen:
yep, mouse will be getting the idi or, what ever diesel I settle on....... I might can get mouse soup added to the menu but, it was turkey butt burgers for tonight. Think it's deer nuts tomorrow night. The soup that was already made sat out of the fridge a little too long and didn't quite smell right so had to throw it out.:nonod:
 
Dont ya hate it when that happens lol.

Well hey I got family in peach country so if I need to run you a 6.9 someday dont be afraid to hollar at me. Hope theres beer and mouse nut soup or whatever your wife is tryin to kill you with to get those damn scouts out of her house :icon_eh:

hell buddy both your post ups are looking great. Youre makin good progress and its good to see these big heavies gettin some lovin. Even if its a discetion on one
 
Actually - who made the most mess, you or the dead mouse? :winky: kinda reminds me of the two nests I found hiding behind the fenders of my 73 beast. I'm also considering naming my yellow Scout either big bird or rubber duckie.
 

Attachments

  • 100_0789.JPG
    100_0789.JPG
    173.3 KB · Views: 435
Hey scooter buddy! Was about to text you today and find out if the pb blaster got the better of you or what, lol. Yeah, I think the dead mouse got a good head start on me but, I'm hoping to surpass his destructive skills.:winky: I like the idea of ducky for your yellow rig. That t-case handle is awesome! Just gotta come up with a good slogan to match. Haven't figured out a slogan for mouse yet.......
 
Pb blaster has been about the only thing holding things together on my end :eek6: all this over time at work (12 hours a day) sure does take away a lot of time from wrenching on scouts. I'm off work today, but already but in 46 hours of work, and probably would have been 48, but power in the plant went out around 3:30pm Wednesday. Although I do browse through the forum several times a day during the week while on my break time and durring my commute to and from work.
 
Back
Top