73 Harvester 1110 wiring diagram

['73 Harvester Boy]

Hi there anyone help me with a wiring diagram for my '73 1110, 258 2wd,I've lost all lights on drivers side
Cheers Steve

 

[FDChappie]

The best way to get that info is to buy a Factory Service Manual form the good folks who run this forum. The whole manual is very well done, it's one of the things I like about IH.

 

[1975IH200]

I have this copy of the 1972 and 1973 wiring diagram.

 

['73 Harvester Boy]

The best way to get that info is to buy a Factory Service Manual form the good folks who run this forum. The whole manual is very well done, it's one of the things I like about IH.

Okay thanks

 

['73 Harvester Boy]

I have this copy of the 1972 and 1973 wiring diagram.

Hi there, many thanks for the attachment, but unable to open the file

 

[1975IH200]

It is a "pdf" file.
You have to 'click' on it with your mouse.

 

['73 Harvester Boy]

Hi fella,
Many thanks for the info it wouldn't open on my tablet but sorted on the laptop, thanks again
Cheers Steve

 

[Scoutboy74]

Gotta be your grounds at each of the non-func light housings to affect only one side. Vehicle light wiring is not side specific except for turn signals. Tail lights are fed by one wire that travels to the rear down one side and then daisy chains over to the other side. Same with back up lights. Same with front headlights and park lights. So if you have all lights to front and rear on the same one side, the harnesses are doing their job.

 

['73 Harvester Boy]

Okay dokey thanks for the heads up, weekend homework, many thanks cheers Steve