Latest activity

  • S
    64 Scout 80 4WD Dana 27 front axle open differential: 2 issues, most important, significant shimmy (death wobble) at 35 mph, goes away...
  • T
    terracottascoutii replied to the thread Blown Head Gasket?.
    Good to know. So, to clarify, turning the drill slowly, and I assume forward and not reversed, until I feel pressure, then turn the...
  • W
    Winchested replied to the thread Blown Head Gasket?.
    You can do it yourself prime till full pressure / resistance, then turn crank 1/16 turn, prime, repeat til you see oil when priming in...
  • T
    terracottascoutii replied to the thread Blown Head Gasket?.
    Thank you, Winchested.Truthfully, I never suspected that when I drained the oil there would be an issue, so I did not check it for...
  • Jesse Stewart
    Jesse Stewart replied to the thread R-100 4X4.
    Another wild hair bit me .. The 75 GMC K15 has vacuum boosted brakes on it, which is oem, they are working ready good and has been...
    • 1782767403660.png
  • W
    Winchested reacted to PAscout800's post in the thread Drum brake standstill with Like Like.
    Good feedback and I appreciate that. I just ordered all new rubber hoses and also the little hardlines up front. I’ll take your advice...
  • W
    There was a post on binderplanet about a guy who installed a more modern dodge cummins automatic in place of a 727...
  • W
    https://www.ihpartsamerica.com/store/aa-700r4adptr.html...
  • P
    PAscout800 replied to the thread Drum brake standstill.
    Good feedback and I appreciate that. I just ordered all new rubber hoses and also the little hardlines up front. I’ll take your advice...
  • W
    Winchested replied to the thread Blown Head Gasket?.
    Pre-oil it properly, via the distributer drive and slowly roll the engine over by hand until you see oil at both rocker stands, the...
  • W
    Winchested replied to the thread Maybe the wrong fuel filter?.
    Yes normal as you have it mounted vertically. The filter media wicks up the fuel.
  • ihpartsjeff
    ihpartsjeff replied to the thread Super stubborn brake drum.
    A brake drum swedge cutter tool. Brake Drum Swedge Cutter A deep holesaw also works.
  • W
    Winchested reacted to InterFord's post in the thread Tie rod help. with Like Like.
    Jeff I did reach out to your parts department and talked with Mike. Even though he hadn't gotten his second cup of coffee he was able to...
  • W
    Winchested replied to the thread Drum brake standstill.
    Does it have a combination valve with brake warning shuttle valve? Start undoing lines 1 at a time starting between the master, and the...
  • ihpartsjeff
    ihpartsjeff replied to the thread 1959 B120 4x4 Travelall.
    I'm not sure if the current owner is a member. I did just see this Travelall out in Springfield, Ohio at the Nationals show so it is...
Back
Top