Latest activity

Did a pressure test with it yesterday on a 2" hose barb and it held pressure with no soap bubbles. I did need to make the hose clamp...

https://www.buitink-technology.com/pdf/tpu-chemical-resistance.pdf This rates TPU chemical resistance to gasoline as excellent.

Urethane typically melts after pro-longed exposure of fuel.

It feels about as stiff as regular hose. The walls are not solid and I chose an in fill pattern that looks compressable. We'll see if it...

Interstate AGM here. Used to go through FLA batteries every 2 years in the Scout, probably due to getting pounded to death on my dirt...

Interstate AGM here. Used to go through FLA batteries every 2 years in the Scout, probably due to getting pounded to death on my dirt...

It feels about as stiff as regular hose. The walls are not solid and I chose an in fill pattern that looks compressable. We'll see if it...

It feels about as stiff as regular hose. The walls are not solid and I chose an in fill pattern that looks compressable. We'll see if it...

i also use a Duracell AGM as stated above, its a good battery. (ran it flat dead a few times) iv abused it and its still going...

I'm running a Duracell label AGM in my Scout. Got it from Batteries Plus a couple years back. It's been fine. Nothing special about...

Is it soft enough to conform to the fill neck and tank connection?

I ran an Enersys Group 31 Deep cycle AGM for 5 years in my scout (bought it used for $80) I however killed it (less than 4 volts) by one...

I'm running a Duracell label AGM in my Scout. Got it from Batteries Plus a couple years back. It's been fine. Nothing special about...

Needed a 2" x 7" filler hose. That stuff is $40 per foot and rots out in no time. Urethane aught to out last me. Used about $1 in...

Has anyone converted to an AGM battery? Would like to hear some feedback on them. Thanks, Richard