wiper motor parking contact

ERIC60

ERIC60

Member
hi all, does anyone have a tutorial on how to adjust my parking contact on my 69 1000D; the wipers start by themselves as I start the engine, and stop sometimes after few round trips and sometimes after 1 mile or more!; I suppose it's due to parking contact not recognized; thanks for help; a video would be the must!
 
There's a piece of round circuit board material with wires going into it on the motor. Not the location and remove the screws. You now should be able to pull the board and access the contacts to clean them. If the brushes are worn that's a whole nother kettle of fish.
 
FDChappie said:
There's a piece of round circuit board material with wires going into it on the motor. Not the location and remove the screws. You now should be able to pull the board and access the contacts to clean them. If the brushes are worn that's a whole nother kettle of fish.
Click to expand...

you mean the three bolts at 120° onto the motor?
 
The three screws around the brown, round circuit board material. You turn the board to set the park location, but it sounds the park brush is not contacting.
 
FDChappie said:
The three screws around the brown, round circuit board material. You turn the board to set the park location, but it sounds the park brush is not contacting.
Click to expand...
I will check that today, but the funny thing is that once the engine is hot, problem disappears!
 
FDChappie said:
The three screws around the brown, round circuit board material. You turn the board to set the park location, but it sounds the park brush is not contacting.
Click to expand...
do you know between which wires I should connect the ohmmeter to check the parking contact ? I can't check with ignition contact made since problem is erratic;
IMG_0557.jpg
 
Look behind the white fibreglass and you'll probably find dirty brushes that need cleaning. How it works will be come obvious once you look under the cover.
 
FDChappie said:
Look behind the white fibreglass and you'll probably find dirty brushes that need cleaning. How it works will be come obvious once you look under the cover.
Click to expand...
ok, I didn't dare to open on pain of doing something stupid, but I will this morning; (for me:LOL:) thanks
 
You must log in or register to reply here.
Back
Top