What hubs are these?

[iowaihnewbie]

Trying to identify what hubs these are on a 1971 1210 4x4. Thanks for the help.

Mike

 

[FDChappie]

Looks like a full floating rear axle hub.

 

[iowaihnewbie]

This is on the front axle.

 

[FDChappie]

Well then they are definitely a full time, nonselectable hub. What are you wanting to do with them?

 

[ihpartsjeff]

If that is a front axle, then they are drive flanges. Honestly have never seen this type before. When you get to taking things apart please post some pictures of them.

 

[iowaihnewbie]

If that is a front axle, then they are drive flanges. Honestly have never seen this type before. When you get to taking things apart please post some pictures of them.

Not sure it's a good thing when you say you've never seen before. Hopefully I can get to the build sheet under the glove box for more information.

 

[iowaihnewbie]

Well then they are definitely a full time, nonselectable hub. What are you wanting to do with them?

I was hoping to put in lock out hubs, but don't think I can now.

 

[ihpartsjeff]

Most likely you still will be able to put selectable lockouts on it. Take one of the flanges off and post some pictures so we can see what you got there.

 

[iowaihnewbie]

Most likely you still will be able to put selectable lockouts on it. Take one of the flanges off and post some pictures so we can see what you got there.

I cleaned up the outside more. Turn out to be lubri matic

 

[Winchested]

You need to pull one of the flanges to see what the splines are inside, to be able to figure out what lockout set you can put in place.