WANTED - SCOUT 80 CLUTCH FORK

ihpartsjeff

ihpartsjeff

Administrator & Owner
Staff member
We are in the middle of a restoration and in need of a clutch fork for a Scout 80 with a t90 three speed transmission. As long as the part has not been previously broken and rewelded we can fix it from there(weld up the contact points and rebush). Also looking for the special bolt that retains the fork. We are all out and the one we have here has already been broken in half and welded up and is not good enough to re-use plus does not have the correct bolt. Let me know what you have or call the sales office. Will pay cash or trade.

img_5362_2.jpg
 
I don't have one on hand. But I think one could be pulled from local wrecking yard near me. I could check this weekend. That is if it's still there. Been a few months since I was there last
 
ihojeff said:
we are in the middle of a restoration and in need of a clutch fork for a Scout 80 with a t90 three speed transmission. As long as the part has not been previously broken and rewelded we can fix it from there(weld up the contact points and rebush). Also looking for the special bolt that retains the fork. We are all out and the one we have here has already been broken in half and welded up and is not good enough to re-use plus does not have the correct bolt. Let me know what you have or call the sales office. Will pay cash or trade.

img_5362_2.jpg
Click to expand...

Pm sent.Jeff
 
Jeff campbell said:
pm sent.Jeff
Click to expand...

Will let you know.

wbrent7766 said:
Jeff
got one I can send down to you if you still need one.
Wes
Click to expand...

As of now I still need one so yes please send it down.

scooter said:
I don't have one on hand. But I think one could be pulled from local wrecking yard near me. I could check this weekend. That is if it's still there. Been a few months since I was there last
Click to expand...

If its still there I'll still take it. Regardless of this project we could use a few more.
 
Be either Friday or Saturday when I get a chance to get out there. If it's still there, it's most likely to be intact. Last time I was checking it out, it was a complete rig, except for a couple broken windows in back shell and cracked windshield.

Anything else you looking for while I'm at it. Since I May end up pulling the trans or motor for that shift fork.
 
Motor and trans are still attached and complete. And currently still in the Scout 80. Couldn't really get a good look to correctly match up. I forgot to get a price check on the fork itself. Kinda got a little side tracked and then pressed for time.

If you really need this at some point, I would probably need to spend a few hours pulling it on a Friday, when I'm not worken o.t., or on a Saturday.
 
You must log in or register to reply here.
Back
Top