Speedo Cable issue

R

Richard

Member
Just installed a T19 and D20 into my 1977 SII - 4cyl 1bbl. It works just fine, seems a bit better throttle response than the anemic 3 spd that was in before.

New issue: the speedometer is not working. when the speedo cable is hooked up to transfer case, no go on speedo. I tested the speedo with a drill gun - speedo works just fine. when connected to tranny,nothing. Attached picture shows the outlet at transfer case fr speedo cable. I am wondering: is it possible that the round part inside is broken? is it plastic? does this require a removal of the back end of the transfer case to remedy?

Also, the large grey object? I am guessing it is a "reducer" of some sort?

let me know and thanks?
 

Attachments

  • speedo gear .jpg
    speedo gear .jpg
    34.3 KB · Views: 316
  • speedo gear 2.JPG
    speedo gear 2.JPG
    148.4 KB · Views: 274
this may be a dumb question but, I have to ask:

is it possible that the speedo cable is not turning the correct way. When i have a drill gun running the speedo cable in reverse (counter-clock wise), the speedometer shows that it's working. The speedo gear that is plugged into the D20 transfer case is turning clockwise. or am I missing something here? DAMN!

Did the 3 speed have a"reverse (CCW)" gear, and the 4 speed have a forward (CW) gear turn?
 
You must log in or register to reply here.
Back
Top