New guy from texas looking for some help to get my brand new to me anyways, Scout running. It's a 1966 spot top with 152 and what I believe a t18. I bought it not running and the trans was off, now the problem is im really not familiar with manual transmissions and the parts that came with it lm have trouble figuring out if they belong to this transmission. I've been looking for some information on how to put it together, with pictures and use this forums for help. Any help appreciated.
Scout sport top trans help
- Thread starter scoutmax
- Start date
mpanzar
Member
From what I can see in the your pictures this looks like the fork that I have on my 63 and 65 with a 152.
This is a picture of the throwout bearing/sleeve that came outa the 65 w/ 152 (same one in my 63):
I think the 152 uses a 10" clutch and based on the condition of yours id just buy a new/rebuild one from IHPA.
http://www.IHPartsAmerica.com/store/clutch-kit-bb-10.html
This is a picture of the throwout bearing/sleeve that came outa the 65 w/ 152 (same one in my 63):
I think the 152 uses a 10" clutch and based on the condition of yours id just buy a new/rebuild one from IHPA.
http://www.IHPartsAmerica.com/store/clutch-kit-bb-10.html
Need a bit more help and guidance. I can't get the throwout bearing to push the clutch. I have adjusted the clutch screw to max and was able to berly touch the clutch but not enough to push it, it only moves about 1/2 to 1 inch. Can the fork in the bell housing be adjusted? Do I have the right throwout bearing for this transmission? Thanks
