I've got two 345 engines for sale; one is out of the truck, ran when pulled, but showed signs of water in the oil and had a lifter knock. The other is still in my Scout and has a severe bottom-end knock. Both are being sold as long block cores and need complete rebuild. $75 ea. Obo
I've also got:
fan clutch - $30 obo (new 8 months ago)
water pump - $40 obo (new 8 months ago)
fuel pump - $ 30 obo (new 8 months ago)
starter (2) - $30 obo
alternator - $30 obo
various pulleys for water pump and crankshaft
2 bucket seat bases - $50 obo
center console - $40 obo
hood - $50 obo
tailgate - $50 obo
345 flywheel, clutch and pressure plate (used) - $50 obo
pertronix-equipped prestolite distributor - $75 obo
2 barrel intake manifolds for a 345 - $100 obo
4 barrel intake manifolds for a 345 - $200 obo
edelbrock 4-barrel carb for 345 - $100 obo
stock aircleaner - $10 obo
stock exhaust manifolds - $20 obo
I've got the following parts still new in the package:
345 freeze plug kit - $10 obo
prestolite dizzy cap and rotor - $15 obo
stock cam and lifters - $150 obo
1 valve cover gasket
1 345 rear main seal
misc other 345 gaskets (water pipe o-rings, water pump gaskets, etc)
I replaced the 345 in my truck last September with another used one and bought a bunch of new parts for it when I did it. That engine just recently developed a knock. I'm going to be swapping the complete drivetrain out of my truck for a 5.3 GM engine and nv4500/Dana 300. Thus, I am selling off all my spare International engine components as well as a few extra parts. I probably forgot something in this list. Feel free to email me with any questions or any other parts you May need that I didn't list, as I May have them and forgot to list it. All parts are for a Scout II, most came from, or were for my '79. To those of you interested in any of the parts still installed in my Scout, have a little patience with me as I'll need a little time to disassemble the truck to get to those parts. Willing to ship smaller items, the bigger components are local pickup only. Everything is located in lodi, CA. All prices are ballpark, but please don't be afraid to make me an offer on this stuff, I'm flexible. I'm trying to clear out some much-needed space in my garage to make room for the new drivetrain. Also willing to trade +/- cash for above-mentioned 5.3 GM engine/nv4500/Jeep Dana 300, straight Scout II liftgate with working handle (or good condition complete hardtop), other Scout II non-drivetrain parts, aircooled vw parts, or? My email is podunk_jr@yahoo.com Or call (925)759-6378. I work a lot during the week and am unable to check my email daily, but I'll be able to get back to you on the weekends, or call and leave a message with your phone number and I'll call you back.
I've also got:
fan clutch - $30 obo (new 8 months ago)
water pump - $40 obo (new 8 months ago)
fuel pump - $ 30 obo (new 8 months ago)
starter (2) - $30 obo
alternator - $30 obo
various pulleys for water pump and crankshaft
2 bucket seat bases - $50 obo
center console - $40 obo
hood - $50 obo
tailgate - $50 obo
345 flywheel, clutch and pressure plate (used) - $50 obo
pertronix-equipped prestolite distributor - $75 obo
2 barrel intake manifolds for a 345 - $100 obo
4 barrel intake manifolds for a 345 - $200 obo
edelbrock 4-barrel carb for 345 - $100 obo
stock aircleaner - $10 obo
stock exhaust manifolds - $20 obo
I've got the following parts still new in the package:
345 freeze plug kit - $10 obo
prestolite dizzy cap and rotor - $15 obo
stock cam and lifters - $150 obo
1 valve cover gasket
1 345 rear main seal
misc other 345 gaskets (water pipe o-rings, water pump gaskets, etc)
I replaced the 345 in my truck last September with another used one and bought a bunch of new parts for it when I did it. That engine just recently developed a knock. I'm going to be swapping the complete drivetrain out of my truck for a 5.3 GM engine and nv4500/Dana 300. Thus, I am selling off all my spare International engine components as well as a few extra parts. I probably forgot something in this list. Feel free to email me with any questions or any other parts you May need that I didn't list, as I May have them and forgot to list it. All parts are for a Scout II, most came from, or were for my '79. To those of you interested in any of the parts still installed in my Scout, have a little patience with me as I'll need a little time to disassemble the truck to get to those parts. Willing to ship smaller items, the bigger components are local pickup only. Everything is located in lodi, CA. All prices are ballpark, but please don't be afraid to make me an offer on this stuff, I'm flexible. I'm trying to clear out some much-needed space in my garage to make room for the new drivetrain. Also willing to trade +/- cash for above-mentioned 5.3 GM engine/nv4500/Jeep Dana 300, straight Scout II liftgate with working handle (or good condition complete hardtop), other Scout II non-drivetrain parts, aircooled vw parts, or? My email is podunk_jr@yahoo.com Or call (925)759-6378. I work a lot during the week and am unable to check my email daily, but I'll be able to get back to you on the weekends, or call and leave a message with your phone number and I'll call you back.
Last edited: