scout 80 master cylinder

[Bogs65]

Greetings. Im interested in buying one of your Scout m/c for disc drum setup. Under your description it notes that minor fender modification needed. Is that just some hammer work or will I need to cut into the inner fender?

 

[Michael Dimock]

To make the master cylinder fit, you just need to do some minor ball peen hammer work right where the lower end of the master would hit the inner fender. I would push the piston end of the master into the firewall plate hole and Mark where the cylinder was hitting. Then follow up with a nice rounded dimple depression below your Mark to allow the master cylinder some "breathing room." that's all you should need.