RPT Transmission Mount

[SSMinnow]

What is the torque for the transmission mount to the cross member. The manual says "extension housing to insulator mounting bolt" at 50 ft.lbs. Is that right. It seems all I keep doing is crushing the mount and it's not getting tighter.

 

[ihpartsjeff]

what is the torque for the transmission mount to the cross member. The manual says "extension housing to insulator mounting bolt" at 50 ft.lbs. Is that right. It seems all I keep doing is crushing the mount and it's not getting tighter.

Tighten the mount until it bottoms out on the two internal sleeves. Then torque it to about 50 ft#'s from there.

 

[SSMinnow]

Thanks