Removing roll up window glass

[2feather]

I have a '66 800 and am trying to remove the window glass and the regulators. I got the window up, but now not sure how to disengage the regulator from it. Will try to fix the gear in the regulator because it skips now and then. The rig sat out in the woods with no top and the windows down for 24 years...

 

[RobertC]

Not sure...

Are there any screws attaching the "arm mechanism" to the regulator?

Are there screws attaching the nylon rollers (roll in a track on the bottom of the window glass) to the "accordian arms"?

Soak them all with "kroil" / "anti-rust" lubricant before trying to loosen...

 

[2feather]

I have the 2000 page manual and it says,
"3. Remove access panel from door"
"4. Disconnect regulator from window channel"
"5. Lift glass from door"
sounds pretty straight forward, but...
I'll look closer for some screws holding the rollers to the regulator arms....

 

[ihpartsjeff]

There are two clips that must be removed from the regulator arms to the window. They are hard to see and can be hard to remove and look like this

 

[2feather]

Jeff, thanks! It was pretty simple to get it done once I knew what to look for! Thanks again. I'm just getting started, so there's liable to be many more questions. : )