Dirty70Bird
New member
I have purchased one of your complete front and rear SOA and reverse shackle kits for my Scout 80, I have most all parts installed, and have come to the point of installing the rear sway bar. I have the holes drilled and have tacked the tube sleeves into the frame. My outer frame dimensions are 35.25" and the sway bar length is 36". The flange thickness of the bushings are 0.25"which only leaves about 0.25" on either end of the cross bar to clamp on the sway bar arms (not nearly enough in my opinion). If would appear the splined sway bar is not long enough. Do you sell a longer sway bar, or am I missing something simple? Thanks for the help! Chris in winona.
