So I’m replacing my outer rear hub seals and want to remove the axle to grease the bearing.
Do I just remove the retaining screw on the differential housing by the hub and pull it out with a slide hammer? Or is there something else I need to do? Don’t want to damage anything. Also, is there an inner seal. Don’t see one in my book but parts stores show one.
Thanks, Dale
Do I just remove the retaining screw on the differential housing by the hub and pull it out with a slide hammer? Or is there something else I need to do? Don’t want to damage anything. Also, is there an inner seal. Don’t see one in my book but parts stores show one.
Thanks, Dale
Last edited: