Power Brakes with an S800 196

K

kingkonger708

Member
The 196 I have from a s800 never came with power brakes that I know of. I added a sii booster for power brakes and wondered where I should run my vacuum line off of on my 196?

Suggestions are much appreciated!
 
You should have a fairly large vacuum port on the drivers side of the intake manifold. Your pcv valve connects there. Add a tee fitting between the pcv connection and manifold and hose barb there to accept the booster line...
There May be another pipe plug on the manifold that will work also but I'm not sure which it will be. One plug May go into the water jacket.
 
Talked at length in person today about the subject. Which has been something I have been speaking of for a day or two about.

Kinda mixing apples, oranges and lemons all together in one bowl regarding kingkongers Scout
 
You must log in or register to reply here.
Back
Top