Missing Pieces

[dieseleagle]

One of my project goals is to swap a manual transmission for a 727. While I've done several motor and automatic transmission swaps over the years, I have never done a manual. I plan to find some competant help for actual assembly, but when that day comes I hope to spend it building instead of head-scratchin. So far I've collected the following parts and hope to get some help identifying the remaining parts I need to buy or scrounge. The project is a 1968 1200c 4wd Travelall. The motor is a 304.

The transmission is a t98.

I have the bell housing, the external linkages, pedal assembly and slave cylinder.

So, what clutch assembly is applicable? Are there some other parts, like a throwout bearing collar and bearing assembly? What else do I need to complete the "internals"? Thanks in advance for any advice that is offered.

 

[jeff campbell]

What ever the transmission came out of is what you want to buy a clutch for.it really wudn't be neccessary to buy 1 especially for a 4wd or 2wd,cause the x-case shud be divorced.so a clutch would be the same for either.?you'll need the pilot bearing,throw out brg., and collar.,disc,p.plate & flywheel.

 

[dieseleagle]

Thanks for the replies and the pm's. Got a e-mail from a vendor I've purchased from before offering the works including the correct throwout collar and neutral balanced flywheel. I know what I'll be doing between Christmas and new years.