Join date: sep 2012
location: so kal
posts: 96
*updated* Travelall & pick-up parts, miscellaneous - los angeles, CA.
*updated* Trying to get my shop cleaned for spring, so this stuff has got to go. I'll post up some pics during the course of the day. Any questions? Feel free to call me at 310-200-7852.....
1). Borg warner cast iron bell housings (have two). Fits International v-8 (and the 4 bangers?) and the borg warner m-12 series three speed auto transmissions, used 'tween '69 & '71. $50.00 each.
2). Full metal dash board (for the gauges, ignition, air vents, glove door etc.) for early 70's Travelall and pick-ups. Unmolested and in real nice shape. Comes with the mounting bolts that go on the bottom edge. $65.00.
3). Nice maroon padded dash top, fit's early 70;s t-all & pick ups. Two real small tears/slices and two very small holes where a gauge was mounted. A bit faded on top but the color is real nice on the vertical face. $75.00.
4). Have about 28 different sizes (14 pairs) of brake shoes, both relined and used. Might be good for cores but the relined ones look good to go. Think they're mostly for the 1/2 ton early 70's t-alls and pick-ups. Five to thirteen bucks a pair.
5). Holley 2200 series 2 bbl carb (1977). Complete but needs a rebuild kit. $35.00.
6). Have six (out of eight) exterior body trim/molding pieces for a traveler. Good shape, decent chrome and black rubber. These have small holes in them in the channel about every 6" where a #8 sheet metal screw was used to fasten them to the body. Plus the backs are flat so that an adhesive can also be used. $55.00 for all six.
7). Have a 1967 304 short block with some very strange pistons (have raised, half concave). Engine is filthy dirty but rotates very smoothly with a socket. Comes with a high rise oil filler tube (passenger side) and an old school vertical mounted oil filter and housing. Also comes with the lifters, the crank dual belt pulley and the water pump housing. Could be a fun project for someone. $100.00.
. torqueflite 77 tranny and t/converter, 1976 . was in my traveler when I bought it and was driveable though a bit soggy during shifting . then one day I lightly punched it up a small hill here in town, heard a 'turbine' whirring sound----and lost all gears, including reverse . haven't a clue what the problem is---but maybe one of you folks wanna tackle it . $50.00
9) . transmission cooler off of a 1970 t-all . good shape, comes with hoses and mounting brackets . 18" x 6" x 1 3/4" . $30.00 .
10) . air conditioner cooler off of a 1970 pick-up . cooler is 25" x 12" x 1 3/8", overall length with mounting flanges is about 37" . comes with one of the vertical steel lines . real nice shape and the fins are all straight . $50.00 .
11) . three adjstable chrome & black dash vents from an early 70's t-all or pick up . one single unit with bracket and one double unit with bracket (for the two that are side x side, under the radio) . $15.00 and $25.00 .
12) . one ac/heater dash mounted control unit (fits the same as above) . real nice shape, levers move smoothly, colors are still good, comes with four vacuum lines, no cables . $35.00 .
13) . *sold*have a matched pair of the plastic end pieces that fit cover the dash board gauge grill, up against the a pillars . no cracks, holes are all intact, painted kind of a goldish/puceish color . think they fit the '61's thru '67's . $35.00 for both . *sold*[/b ]
14) . have an old, filthy Holley four barrel carb body with both bowls . missing all 6 butterflies and three shafts . still has the accelerator pump and the fuel inlet tube on her . might be a fun project for someone here . #dpof 9510-u, list #4548-s . $20.00 .
15) . have a pretty nice piece of nos royal blue w/black speckled automobile carpet . low pile, good quality . has a gray vinyl backing on it . made by powerbond . figure on a usable area of 68" x 94" (after trimming off the edges a bit to clean it up) . $40.00 .
16) . chromed front grill for early 70's t-all & pick-ups . has a few dents but the chrome is still decent---I'd rate it a 6.5 or a 7 . no light rings, center grill or inserts . $45.00 .
17) . 345 intake manifold, thermostat housing and upper water riser housing . came off of a 1970, hence it's pre-egr . I was a few days away from installing this on my 345 but I stumbled across a newer one . the t-sat is a 185 and I tested it before installing it . all painted and almost ready to go----you'll wanna clean up the mounting flanges first . and maybe change the paint color---the mani is chrysler blue hi-temp, the t-stat housing is aervoe silver hi-temp and the upper riser is rustoleum hammered copper . I put on two coats of red oxide primer on all of these, before shooting 3 or 4 coats of enamel . $140.00 .
18) . *sold*two speed wiper motor off of a '67 t-all . I just tore into it, cleaned her & lubed her up and she works great . comes with the original 3 wire/three couple connections (red, black and green) . 100.00 . *sold*[/b ]
19) . have a wiper arm component thingy---fit's under the cowl of the early 70's t-alls and pick-ups . has the center mounting plate.bracket for the motor, the two control arms and the two spindles where the wiper arms go . real nice condition with minimal surface rust . $50.00 .
20) . have a pair of black plastic defroster ducts that go under the dash pad for a '67 pick-up . 13 3/8" long overall, uses 2" I.d . hose . excellent shape, $25.00 for both .
21) . four different style/sized heater boxes....including one really neat clardy 'cool air' unit from the early 60's . some have the switches & relays on them, as well as the vacuum operated goodies . $40.00 and up .
22) . got one old, filthy dirty 392 cylinder head with valves and springs . a bit beat-up on the mounting surface and will at least need a mill job---but I think it's still usable . looks to be a pre-smog queen . $20.00 .
23) . have four or five master cylinders in various condition & sizes, though one looks to be rebuilt and/or new . $15.00 and up .
24) . have a couple of of 'brake pedal lowering' kits....whatever the hell those are . think they're for the early 70's trucks . $20.00 each .
25) . have two or three old wiring harnesses for either the '67's, or the early 70's . lotsa good connectors and relays and bulb sockets and stuff on these . $40.00 each .
26) . got a single sump oil pan & oil filter off of a 1970 345 2wd t-all . pan looks solid, not sure about the pump . $50.00 for both .
27) . front sway bar for an early half ton 70's t-all or pick-up . good condition, comes with the two mounting brackets and rubber . $35.00 .
28) . a pair of white bench seat sliding mounting brackets (floor to seat) . I'm pretty sure they're for the front seat, but May fit the rear also . nice shape and they work smoothly . I might be able to dig up some mounting bolts for these if you need them . $40.00 .
that's about it for now . please feel free to call me if you have any questions, need some pics or measurements . 310-two hundred-7852, ask for rick . thanx for looking,
oh yeah, 'smore ....
29) . got a gas pedal for an early 70's t-all or truck . $14.00
30) . two carter fuel pumps with the glass bowls & fuel filters . $32.00 each, shipped;
[/url ]
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=dsc_1144.jpg]
[/url ]
31) . traveler rear hatch weather strip, 13 feet long, brand new, $35.00 .
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihcweatherstrip001.jpg]
[/url ]
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihcweatherstrip011.jpg]
[/url ]
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=dsc_1136.jpg]
[/url ]
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihc070.jpg]
[/url ]
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=dsc_10103.jpg]
[/url ]
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihcparts5124.jpg]
[/url ]
I'll post up some more pics and parts a bit later . if there's something else you folks need but don't see, please don't hesitate to ask . in the meantime, you can contact me from here, or give me a ring at 310-two hundred-7852 .
thanx for looking, folks
rb
location: so kal
posts: 96
*updated* Travelall & pick-up parts, miscellaneous - los angeles, CA.
*updated* Trying to get my shop cleaned for spring, so this stuff has got to go. I'll post up some pics during the course of the day. Any questions? Feel free to call me at 310-200-7852.....
1). Borg warner cast iron bell housings (have two). Fits International v-8 (and the 4 bangers?) and the borg warner m-12 series three speed auto transmissions, used 'tween '69 & '71. $50.00 each.
2). Full metal dash board (for the gauges, ignition, air vents, glove door etc.) for early 70's Travelall and pick-ups. Unmolested and in real nice shape. Comes with the mounting bolts that go on the bottom edge. $65.00.
3). Nice maroon padded dash top, fit's early 70;s t-all & pick ups. Two real small tears/slices and two very small holes where a gauge was mounted. A bit faded on top but the color is real nice on the vertical face. $75.00.
4). Have about 28 different sizes (14 pairs) of brake shoes, both relined and used. Might be good for cores but the relined ones look good to go. Think they're mostly for the 1/2 ton early 70's t-alls and pick-ups. Five to thirteen bucks a pair.
5). Holley 2200 series 2 bbl carb (1977). Complete but needs a rebuild kit. $35.00.
6). Have six (out of eight) exterior body trim/molding pieces for a traveler. Good shape, decent chrome and black rubber. These have small holes in them in the channel about every 6" where a #8 sheet metal screw was used to fasten them to the body. Plus the backs are flat so that an adhesive can also be used. $55.00 for all six.
7). Have a 1967 304 short block with some very strange pistons (have raised, half concave). Engine is filthy dirty but rotates very smoothly with a socket. Comes with a high rise oil filler tube (passenger side) and an old school vertical mounted oil filter and housing. Also comes with the lifters, the crank dual belt pulley and the water pump housing. Could be a fun project for someone. $100.00.
. torqueflite 77 tranny and t/converter, 1976 . was in my traveler when I bought it and was driveable though a bit soggy during shifting . then one day I lightly punched it up a small hill here in town, heard a 'turbine' whirring sound----and lost all gears, including reverse . haven't a clue what the problem is---but maybe one of you folks wanna tackle it . $50.00
9) . transmission cooler off of a 1970 t-all . good shape, comes with hoses and mounting brackets . 18" x 6" x 1 3/4" . $30.00 .
10) . air conditioner cooler off of a 1970 pick-up . cooler is 25" x 12" x 1 3/8", overall length with mounting flanges is about 37" . comes with one of the vertical steel lines . real nice shape and the fins are all straight . $50.00 .
11) . three adjstable chrome & black dash vents from an early 70's t-all or pick up . one single unit with bracket and one double unit with bracket (for the two that are side x side, under the radio) . $15.00 and $25.00 .
12) . one ac/heater dash mounted control unit (fits the same as above) . real nice shape, levers move smoothly, colors are still good, comes with four vacuum lines, no cables . $35.00 .
13) . *sold*have a matched pair of the plastic end pieces that fit cover the dash board gauge grill, up against the a pillars . no cracks, holes are all intact, painted kind of a goldish/puceish color . think they fit the '61's thru '67's . $35.00 for both . *sold*[/b ]
14) . have an old, filthy Holley four barrel carb body with both bowls . missing all 6 butterflies and three shafts . still has the accelerator pump and the fuel inlet tube on her . might be a fun project for someone here . #dpof 9510-u, list #4548-s . $20.00 .
15) . have a pretty nice piece of nos royal blue w/black speckled automobile carpet . low pile, good quality . has a gray vinyl backing on it . made by powerbond . figure on a usable area of 68" x 94" (after trimming off the edges a bit to clean it up) . $40.00 .
16) . chromed front grill for early 70's t-all & pick-ups . has a few dents but the chrome is still decent---I'd rate it a 6.5 or a 7 . no light rings, center grill or inserts . $45.00 .
17) . 345 intake manifold, thermostat housing and upper water riser housing . came off of a 1970, hence it's pre-egr . I was a few days away from installing this on my 345 but I stumbled across a newer one . the t-sat is a 185 and I tested it before installing it . all painted and almost ready to go----you'll wanna clean up the mounting flanges first . and maybe change the paint color---the mani is chrysler blue hi-temp, the t-stat housing is aervoe silver hi-temp and the upper riser is rustoleum hammered copper . I put on two coats of red oxide primer on all of these, before shooting 3 or 4 coats of enamel . $140.00 .
18) . *sold*two speed wiper motor off of a '67 t-all . I just tore into it, cleaned her & lubed her up and she works great . comes with the original 3 wire/three couple connections (red, black and green) . 100.00 . *sold*[/b ]
19) . have a wiper arm component thingy---fit's under the cowl of the early 70's t-alls and pick-ups . has the center mounting plate.bracket for the motor, the two control arms and the two spindles where the wiper arms go . real nice condition with minimal surface rust . $50.00 .
20) . have a pair of black plastic defroster ducts that go under the dash pad for a '67 pick-up . 13 3/8" long overall, uses 2" I.d . hose . excellent shape, $25.00 for both .
21) . four different style/sized heater boxes....including one really neat clardy 'cool air' unit from the early 60's . some have the switches & relays on them, as well as the vacuum operated goodies . $40.00 and up .
22) . got one old, filthy dirty 392 cylinder head with valves and springs . a bit beat-up on the mounting surface and will at least need a mill job---but I think it's still usable . looks to be a pre-smog queen . $20.00 .
23) . have four or five master cylinders in various condition & sizes, though one looks to be rebuilt and/or new . $15.00 and up .
24) . have a couple of of 'brake pedal lowering' kits....whatever the hell those are . think they're for the early 70's trucks . $20.00 each .
25) . have two or three old wiring harnesses for either the '67's, or the early 70's . lotsa good connectors and relays and bulb sockets and stuff on these . $40.00 each .
26) . got a single sump oil pan & oil filter off of a 1970 345 2wd t-all . pan looks solid, not sure about the pump . $50.00 for both .
27) . front sway bar for an early half ton 70's t-all or pick-up . good condition, comes with the two mounting brackets and rubber . $35.00 .
28) . a pair of white bench seat sliding mounting brackets (floor to seat) . I'm pretty sure they're for the front seat, but May fit the rear also . nice shape and they work smoothly . I might be able to dig up some mounting bolts for these if you need them . $40.00 .
that's about it for now . please feel free to call me if you have any questions, need some pics or measurements . 310-two hundred-7852, ask for rick . thanx for looking,
oh yeah, 'smore ....
29) . got a gas pedal for an early 70's t-all or truck . $14.00
30) . two carter fuel pumps with the glass bowls & fuel filters . $32.00 each, shipped;
[/url ][url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=dsc_1144.jpg]
[/url ]31) . traveler rear hatch weather strip, 13 feet long, brand new, $35.00 .
[url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihcweatherstrip001.jpg]
[/url ][url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihcweatherstrip011.jpg]
[/url ][url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=dsc_1136.jpg]
[/url ][url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihc070.jpg]
[/url ][url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=dsc_10103.jpg]
[/url ][url=http://s774.photobucket.com/albums/yy21/shiftster/ihc%20parts/?action=view¤t=ihcparts5124.jpg]
[/url ]I'll post up some more pics and parts a bit later . if there's something else you folks need but don't see, please don't hesitate to ask . in the meantime, you can contact me from here, or give me a ring at 310-two hundred-7852 .
thanx for looking, folks
rb
Last edited:
