Michael Mayben
IHPA Tech Moderator - Retired & No Longer Online
The old tf-2 instructions are way too large a file to email.
I can send you a copy by snailmail if ya gimme your snailmail to addy, send it to:
michael@IHPartsAmerica.com.
However, since several areas are "different" they May be somewhat confusing, you need to use the instruction set that is packed with the kit that you have now. There was a time when some versions of that kit included a "how-to" video, however I think it was more of a hindrance since it delt with only one variation of valve body and was not representative of the exact stuff used in the IH units.
The earlier instructions have several supplements, including one for the "no yo-yo" modded valve that is part of that package. That used to be a separate item and modification available from transgo, it is now included in the kit that you have, thus that is part of the revised instructions.
The thread that I have here on the forum involves the exact kit that you are dealing with, not the earlier version!
Also, the "munroe" book which we talk about alot and is an essential tool for dealing with the 727 has a section devoted to the tf-2 install, but it is the early version and also includes several shots of different valve body variations, so while it is an excellent reference for this also, ya still must be very exacting in dealing with the valve body you have. So take detailed start-to-finish pics of all that you do so you will have that for reference. Then if ya need clarification, we'll compare your pics/stuff with what I have so we can work through it!
I can send you a copy by snailmail if ya gimme your snailmail to addy, send it to:
michael@IHPartsAmerica.com.
However, since several areas are "different" they May be somewhat confusing, you need to use the instruction set that is packed with the kit that you have now. There was a time when some versions of that kit included a "how-to" video, however I think it was more of a hindrance since it delt with only one variation of valve body and was not representative of the exact stuff used in the IH units.
The earlier instructions have several supplements, including one for the "no yo-yo" modded valve that is part of that package. That used to be a separate item and modification available from transgo, it is now included in the kit that you have, thus that is part of the revised instructions.
The thread that I have here on the forum involves the exact kit that you are dealing with, not the earlier version!
Also, the "munroe" book which we talk about alot and is an essential tool for dealing with the 727 has a section devoted to the tf-2 install, but it is the early version and also includes several shots of different valve body variations, so while it is an excellent reference for this also, ya still must be very exacting in dealing with the valve body you have. So take detailed start-to-finish pics of all that you do so you will have that for reference. Then if ya need clarification, we'll compare your pics/stuff with what I have so we can work through it!