i dont know how

1

1hc72

Member
Ok, I got my throttle cable in today, I just dont know how to take off the old one and put on the new one, if you can help me out I would be the most happy person on the earth
 
One ot the biggest things you could do to help keep your IH on the road is a service manual and parts manual. Gott all the stuff you need to know in black and white. Jeff sells all of them so give him a call.

Again as with your shocks a picture of your cable attach point will go miles to help us help you.
 
Throttle cable or accelerator cable?

If I remember correct. There is a plastic connector on the pedal arm and a 1/4" bolt at the fire wall. Then the cable runs to a ball joint on the carb.

It's a pretty simple fix. If your good a laying upside down getting the cable out of the arm. I would replace the holder and bushings on the arm.
 
I figured it out, all I had to do was pull the old one off and press the new one on. After replacing the cable the truck moves like the wind
 
You must log in or register to reply here.
Back
Top