Justutt67
Member
I have a front Dana 44 axle out of a 1980 Scout II. Axle has been cut and turned for a Spring over axle conversion with IH parts America spring perches. Gears are 3.54 open diff. Comes complete with brand new Moog ball joints, spicer axle shaft U-joints, all new wheel bearings and hub seals, IH 8 bolt flat top outer knuckles that have been machined for high steer with grade 8 beefier 5/8 studs instead of factory 9/16. Pinion angle is set to 10* with 5" long shackles and 8* with stock length shackles. Caster angle is 5-6* with 5" shackles and 4-5* with stock length shackles. Axle has brake calipers and will come with one of 2 sets of locking hubs that I have. Both sets of hubs need to be cleaned up but are in good shape. Local pick up only Denver CO.
