Fan shroud for 72 pickup
- Thread starter gregf
- Start date
I just called Scout lightline in order to get the latest information on the 'd' series pickup and Travelall fan shrouds. Currently there are new fiberglass reproductions of the 69'-73' model years with the IH v8 engine as well as a gavaneal metal replacement. Either one retails for $130 plus shipping. The fiberglass repops are being made in small runs so there May be times when these are out of stock while the metal ones should always be available. For 74'-75' model years with the IH v8 engine those at this time are only being made in metal and retail for $150.
An estimate on shipping will vary depending on whether the shroud is shipped from our location or direct from Scout lightline but should range roughly in the $18-$30 range.
An estimate on shipping will vary depending on whether the shroud is shipped from our location or direct from Scout lightline but should range roughly in the $18-$30 range.
Michael Mayben
IHPA Tech Moderator - Retired & No Longer Online
Great news! I get inquiries about the pickall shrouds (both models) all the time! Including from greg!
And as a further point of information...I have confirmed that the "deep" shrouds for the '74>'75 pickalls equipped with the amc 401 motor are the same as the shroud used with the 392-powered rigs. These would be the trucks with the "set-back" engine location.
And keep in mind...some "late" model year 1973 pickalls are also equipped with the amc 401 in the set-back location. So the '74>'75 model year designation for the revised engine location (and engine application) is a moving target. In fact, lyle has a '73 t'all with the set-back 401 motor.
And as a further point of information...I have confirmed that the "deep" shrouds for the '74>'75 pickalls equipped with the amc 401 motor are the same as the shroud used with the 392-powered rigs. These would be the trucks with the "set-back" engine location.
And keep in mind...some "late" model year 1973 pickalls are also equipped with the amc 401 in the set-back location. So the '74>'75 model year designation for the revised engine location (and engine application) is a moving target. In fact, lyle has a '73 t'all with the set-back 401 motor.