Does the Vintage Air Super Magnum fit?

ahill22584 · Wednesday at 10:55 AM

Hi Jeff, I saw you put the Vintage Air Super Magnum in the Patriot Scout with “little firewall modifications”. Could you decribe what modifications were needed? I want to do the same install and would like to know what I am in for. I know you loose the stock glove box and probably relocate the hood release. Is there anything else needed to make it fit?
78 Scout II LS5.3/TR4050/Dana300
Thanks.
P.S. Loving the UA2025 videos.

ihpartsjeff · 2025-12-04T06:12:03-0800

To make the until fit the firewall I had to remove the "hump" on the passenger side where a gas pedal would be located if it were right hand drive. Aside from that I have no additional information to offer as I fabricated my own dash and have no glove box.

ahill22584 · 2025-12-04T08:31:03-0800

ihpartsjeff said:
To make the until fit the firewall I had to remove the "hump" on the passenger side where a gas pedal would be located if it were right hand drive. Aside from that I have no additional information to offer as I fabricated my own dash and have no glove box.

Thanks for the reply. Does the whole hump need to be removed or do you think it could be persuaded with a big “friendly” hammer?