D Series Travelall & Pickup Front Lift Kit

[79scout-too]

There is one 2" OD, 7/16" ID, 1/4" thick steel washer/spacer supplied with this kit.

What is this for?

 

[ihpartsjeff]

If memory serves me correct, it is used for one of the bolts or ubolts on the pumpkin side of the axle.

 

[ThePickle]

The IH pitman arm contacts the new CPT front spring hanger with this lift kit. Is there a different pitman arm that you recommend?

Working on a 1970 1200D with a Chevy Dana 44 front axle.

 

[ihpartsjeff]

The IH pitman arm contacts the new CPT front spring hanger with this lift kit. Is there a different pitman arm that you recommend?

Working on a 1970 1200D with a Chevy Dana 44 front axle.

Never seen that before. Please post a picture so we can see what you have going on.

 

[ThePickle]

I said pitman arm above, but it is the nut of the draglink that hits the spring hanger. I assume I just need a different pitman arm.

 

[Zaedster]

That steering box doesn't look like it is mounted in the original position. We have never had this issue, there is plenty of room.

 

[ThePickle]

Ok, Would one of the pitman arms that you sell work for me? Option #2?

Power Steering Pitman Arms for Custom Steering Applications

Check out the deal on Power Steering Pitman Arms for Custom Steering Applications at IH Parts America

www.ihpartsamerica.com

 

[Zaedster]

None of those will work.