Clutch specs for a 1971 IH 1210

E

Ericson13

New member
Hey,I'm replacing the clutch on my 1971 IH 1210 with a 392 and a for speed and wanted to know if any body could tell me how hard I should put the bolts for my fly wheel and clutch pack down at ie torque spec's.
 
Flywheel to Crankshaft....45 to 55 FT.LB. Use sealant on bolt threads as oil is on the other side.
Clutch Cover....Give me bolt size and threads pitch please.
 
Hi, I have been trying to get a new clutch kit for my truck for about 3 mouth's now.It is an 11" friction disc with a ten tooth spline and a 1 1/4 imput shaft.Do you know any company's that specialize in in clutch and transmission components for old internationals?
 
Yes. IHPA, the company that owns and maintains this tech forum. At the top of this page is a link to their online store which is very intuitive to navigate through for what you need.
 
Ericson13 said:
Hi, I have been trying to get a new clutch kit for my truck for about 3 mouth's now.It is an 11" friction disc with a ten tooth spline and a 1 1/4 imput shaft.Do you know any company's that specialize in in clutch and transmission components for old internationals?
Click to expand...
We do not sell clutch discs by themselves on our online store but you can try calling our parts department and see if we do have or can get you just a clutch disc. 530-274-1795.
 
You must log in or register to reply here.
Back
Top