Bull Gear Retainer Nut Torque

[78SSII]

Hello,

not sure if this area of the transmission area is the correct place for this.

But my question is, what is the torque put on the retainer nut that holds the bull gear on the transmission for the transfer case? I will be installing a Dana 300 on to my t-19 wide this weekend and want to make sure I have the torque right as I am not able to find it in my manual.

Thanks all,
bill

 

[Michael Mayben]

hello,

not sure if this area of the transmission area is the correct place for this.

But my question is, what is the torque put on the retainer nut that holds the bull gear on the transmission for the transfer case? I will be installing a Dana 300 on to my t-19 wide this weekend and want to make sure I have the torque right as I am not able to find it in my manual.

Thanks all,
bill

Torque on that nut is 175ft./lbs. For the automatic,...200>300ft./lbs. For the t-18/t-19 with a 3/4-16 shaft thread (same as for a companion flange).