Borg Warner 11 Auto Tranny (aka T39)

J

JP800A

New member
$200 I have a borg warner model 11 (aka t39) automatic transmission for sale. Previous owner said it was a running tranny before it was pulled. I have three of these, but only need two. I need the cash for other parts. Crossmember not included. Holler at me with questions or offers. Price is negotiable. Call or text 214-762-7701
 

Attachments

  • 30 BW11 Auto Trans 9-2013.jpg
    30 BW11 Auto Trans 9-2013.jpg
    79 KB · Views: 671
  • 31 BW11 Auto Trans 2 9-2013.jpg
    31 BW11 Auto Trans 2 9-2013.jpg
    75 KB · Views: 571
Do you still have this transmission? I have a '69 post office with an automatic and I might be interested in a backup as I am yet to test my current tranny.

Thanks.
 
Hey. Yes I actually have 3 of them now. One is for sure going to need a complete over haul. One I'm keeping. And the other is complete and was told that it was running fine before pulled. Worst case it will need new seals. Let me know. I'm about 2 hours, give or take, from you. I'd be interested in trades too. I need a few things. Lemme know what you got.
 
Hello again!
Would you happen to have a kick down switch or wiring guide for the kick down switch?

Hope you're well.
 
sloantx said:
hello again!
Would you happen to have a kick down switch or wiring guide for the kick down switch?

Hope you're well.
Click to expand...

Hey man how are you doing? Actually the both warner 11 did not have a kick down. It used vacuum for its up and down shifting. If you have a kick down in your current set up, more than likely you are running a 727.
 
Thanks for the response! I think you're right. What's interesting is my modulator has vacuum line going to the engine and a wire hanging disconnected. I attached a pic here. There was a kickdown on the floor when I got the Scout, but it wasn't connected to anything?

It looked like everything was original, but I'm a bit lost now.
 

Attachments

  • trans module.jpg
    trans module.jpg
    51.6 KB · Views: 803
sloantx said:
thanks for the response! I think you're right. What's interesting is my modulator has vacuum line going to the engine and a wire hanging disconnected. I attached a pic here. There was a kickdown on the floor when I got the Scout, but it wasn't connected to anything?

It looked like everything was original, but I'm a bit lost now.
Click to expand...

Got me there man. Maybe post this up on binderplanet.com?
 
Would anyone happen to know where I can get seals for this tranny?

I've developed a pretty good leak where the shifter arm goes into the housing.

Thx.
 
Are thes bw 11 tranny's bolted to v8 's ? How May bolts do the flexplate have to bolt to torque converter ? 4 or 6 ? Thx, Jeff
 
You must log in or register to reply here.
Back
Top