Jeff, the aluminum radiator I bought some time ago, finally got around to installing it. It has a small leak at the trans line fitting at (upper) connection. It's at what I would call a "bung" is this a compression type fitting? Rather not pull it apart to find out. The brass fittings going into it are fine, it leaks at the bung. Don't want to put a wrench on it if it's going to mess it up. Leaking trans fluid. Need to know if it can be tightened or what. Thanks.
Hey, btw, thanks for the speedy service on the order a few weeks ago, appreciate it, good stuff!
Chris
Hey, btw, thanks for the speedy service on the order a few weeks ago, appreciate it, good stuff!
Chris
Last edited:
