74 100 & 73 1210WM

76 Patriot

76 Patriot

Member
74 100 2wd project. Needs lots of work. Some already done.
258 i6 from a heep (stock 258 long gone), 3 spd (I think) column shift. I started this with my son. He went army and has lost interest so it has to go. Edit: here's some pics...
Edit #2 - I have posted this truck on the local craigslist, so it is subject to prior sale. 1974 IH 100 2wd pickup

driverfront.jpg


driverrear.jpg


passfront.jpg


passrear.jpg


I also have a 73 1210 wagonmaster, 2wd. The motor is gone and the 60 rear is out of it. I will put the 60 back under it if necessary, or you can take it loose. This truck was wrecked and I was going to use the fenders and hood on the '74. The tailgate, bedrail caps and dashpad were sold awhile ago. I can provide current pics if needed.

wagonmaster001.jpg


wagonmaster004.jpg


wagonmaster007.jpg


I have some other miscellaneous parts that I'll throw in, but I'd like to see these both go together.

$800.00 o.b.o. To take it all. I am located in redding, CA. No shipping. Pm or email For more info. I only have computer access during the week, so be patient.

Thanks for looking.
 
Last edited:
I have edited my original post with some crappy cell phone pics of the 100. If there is anything anyone needs a better picture of, let me know and I'll get it.

I'll consider any offer for all or part of either rig. We have $800 invested and that's what I'm asking. If I don't get any interest soon these will have to go to the scrap yard. The city wants them out of my yard by the end of next week.:mad2:
 
as stated in your ad, the tailgate was sold some time ago....that is what I really needed.
4-6-2009_9.jpg


1. I also need the rear bed floor support that is located under the bulkhead.
4-6-2009_8.jpg


2. I could also use some sections of the floors, front and rear. (patch panels)

however, I am pretty sure that I can get one from a t-all out this way.
 
That rear seat is specific to the wagonmaster. It looks similar to a Travelall seat but it is not the same. I could use it for mine. Unfortunately I too am across the country. If you do scrap it save the seat at least. Contact me or erik if you change your mind about shipping.
 
stu simpson said:
that rear seat is specific to the wagonmaster. It looks similar to a Travelall seat but it is not the same. I could use it for mine. Unfortunately I too am across the country. If you do scrap it save the seat at least. Contact me or erik if you change your mind about shipping.
Click to expand...

The only problem I have with shipping is; I shipped the parts I sold before to alabama, the buyer agreed to pay the shipping cod. I crated the parts and shipped them freight using my employer's 50% discount. When he got the parts the cod bill was $600.00! He paid it, but niether of us were very happy about it. He wanted the seats, too, but we couldn't figure out an affordable way to ship them.

If you have a good way of shipping the rear seat, let me know. I don't know what condition the actual seat is in as it has a cover on it. I can pull the cover and take better pics if you'd like. Let me know.
 
If I can get an offer on the '74, I can tow it into the back yard and keep it for a while longer. I really hate to see this much usable IH iron go to waste.

I am willing to part out the wm as long as buyers provide explicit shipping instructions and pay the shipping. I can provide weight, but you'll have to tell me how you want it shipped.

I have an offer for the front drums, so those are off the table for now.
 
76 patriot said:
if I can get an offer on the '74, I can tow it into the back yard and keep it for a while longer. I really hate to see this much usable IH iron go to waste.

I am willing to part out the wm as long as buyers provide explicit shipping instructions and pay the shipping. I can provide weight, but you'll have to tell me how you want it shipped.

I have an offer for the front drums, so those are off the table for now.
Click to expand...

I am not sure what you shipped or via what company, but a tailgate From your location to my door in maryland via fedex freight is $65.00 business to business. I will measure my own seat and get a couple of estimates and get back to you. There might be a jump up in cost for something that size, we shall see.
 
stu simpson said:
I am not sure what you shipped or via what company, but a tailgate From your location to my door in maryland via fedex freight is $65.00 business to business. I will measure my own seat and get a couple of estimates and get back to you. There might be a jump up in cost for something that size, we shall see.
Click to expand...

This is exactly why you need to tell me how you want it shipped. I used our company freight account. Had the tailgate, the bed rail caps and the dashpad crated up (mostly for protection) and shipped it cod, business to business. Neither of us thought to use fed-ex, or any other carrier for that matter. It was a hard lesson learned.

Anyway, I'll ship anything you want, on your dime, per your instructions. Just let me know. Also, let me know if you want a picture of the seat.
 
76 patriot said:
this is exactly why you need to tell me how you want it shipped. I used our company freight account. Had the tailgate, the bed rail caps and the dashpad crated up (mostly for protection) and shipped it cod, business to business. Neither of us thought to use fed-ex, or any other carrier for that matter. It was a hard lesson learned.

Anyway, I'll ship anything you want, on your dime, per your instructions. Just let me know. Also, let me know if you want a picture of the seat.
Click to expand...

I would very much like a pic or two of the seat. I have already measured mine and will work on the shipping stuff. If it starts to look bad I will let you know. Please send the pics and your contact information to:

stuartsimpson@comcast.net
 
erik socha said:

1. I also need the rear bed floor support that is located under the bulkhead.
4-6-2009_8.jpg


2. I could also use some sections of the floors, front and rear. (patch panels)
Click to expand...

It looks like this is going in the 'part-out' direction, if you're still interested. I looked at the bed support and it's straight and solid. I think I also have the inner panel (pass. Rear) that's missing in your picture. The bed is full of scrap metal and parts, but I can empty it and get some pics if you'd like. Let me know.

Front drums are back on the table.
 
yes, I am very interested in that part. The bed rail in the photo is located right under the bulkhead. I believe that the bed rail is bolted to the frame. The second item that I would be interested in is this here......
731210wm_13.jpg


it is the rear edge of the wagonmaster bed. It starts a few inches into the bed.....I'll take photos of mine and email you more details.....:icon_up:

thanks
 
erik socha said:
yes, I am very interested in that part. The bed rail in the photo is located right under the bulkhead. I believe that the bed rail is bolted to the frame. The second item that I would be interested in is this here......
731210wm_13.jpg


it is the rear edge of the wagonmaster bed. It starts a few inches into the bed.....I'll take photos of mine and email you more details.....:icon_up:

thanks
Click to expand...

here are some photos of the rear edge of the wagonmaster bed that I have...


wagonmaster001.jpg


wagonmaster002.jpg


wagonmaster003.jpg
 
It looks like this is changing to a "parts for sale" post. I am willing to take parts off either of these trucks. I am not looking to get Rich off this stuff, I just hate to see it go to the scrap yard. Let me know what you need and I'll get pics for you. Buyer pays all shipping costs.

I would trade the 74 for a working or re-buildable 8274 winch, used tandem axle set-up with brakes for my car hauler project, used lockers for my d44s, 3.73, used high steer stuff (I have knuckles and heims), I need arms and hardware, hd tie rod and drag link. Something, anything????

I'd like to get $400.00 for the heep amc258 out of the 74 and I'd prefer not to ship that. It includes electronic ignition, truck avenger carb, new gaskets (still in the box), reman. Clutch (0 miles), 3 spd tranny with brand new rpt mount, new plugs, new wires, starter, intake and exhaust manifolds, etc, etc.

Everything else is there and available. I will edit with a list of parts and prices as soon as I can (I'm at work).

Could the moderator please move this to the "parts for sale" forum?
 
If you decide to part out the truck I might be interested in the bed and tailgate. Shipping might kill the deal though.
Tate
 
You must log in or register to reply here.
Back
Top