1964 Travelall - Steering Wheel

[1962300]

I have the stock 4 spoke steering wheel with horn button in the center. No matter how I rotate the horn button, the "IH" ends up upside-down. Anyone able to post an image of their 4 spoke steering wheel so that I May determine if I have my wheel mounted correctly...or if I am 180 degrees off and need to flip it over?

Thanks!

 

[Robert Kenney]

Here's a picture of a 64 Travelall I had. The 4 spoke wheel use in the t-all and the other IH trucks are mounted the same way/orientation. That is with the two larger spokes up. The photo shows the wheel turned but that is only because it is not steering straight ahead. If you don't have the wheel with the large spokes up, remove it and reclock it. Hth

 

[1962300]

My larger spokes are positioned upwards. I wonder what the trick is, then, to have the "IH" horn button face upwards...instead of upside down as mine does. I have tried every bit of slight rotation with the horn button install. I wonder what acts as the "female" receptacle for the horn button. Whatever that is, it must be rotated 180 degrees off under that horn button cap?

 

[Robert Kenney]

I don't remember if the plate with the rubber latches has two or three screws. Two screws rotate it 180. Or rotate the IH emblem 180. The emblem has tabs I think that hold it on the button.