Mechanical Fuel Pump - vacuum source hookup

[cs.collier]

Previous owner installed an electric fuel pump and removed the original mechanical one. I am reverting back to a mechanical fuel pump so that I can hook up my vacuum wipers. The Scout is 95% original and I am trying to get to as close to 100% original as I can. Does anyone know which vacuum source the original fuel pump connected to?

1968 Scout 800
266 v8
Holley 2300 carburetor
airtex 1117 fuel pump (brand new)
vacuum wipers

 

[Greg R]

"in" on the vacuum pump went to the wipers, "out" went to a fitting on the intake manifold.

 

[cs.collier]

Do you have a picture or can you tell me which vacuum source the fuel pump connected to?

 

[Scooter]

do you have a picture or can you tell me which vacuum source the fuel pump connected to?

Re-read greg r's post. Both "in" and "out" fittings are off the fuel pump.

 

[Robert Kenney]

There are two smaller tube fittings on the top portion of fuel pump(vacuum pump). You should be able to find an arrow to indicate which tube is in and out. Out goes to the intake manifold, the in goes to the wipers. Use the manifold port on the drivers side middle of the intake manifold as the place to connect out tube.