CPT-SII-TIERODDRAGLINK => Ball-Joints/Draglink End

F

Flott20

New member
Hi,
quite a while ago I bought both the tierod and the draglink. Now one of the balljoints is worn and needs to be replaced. What type of draglink end do I have to look for? Since I am located in Germany and I need it to pass technical inspection a indication from what car these came from would help to find one here locally.
Thanks for your help
Florian
 
Flott20 said:
Hi,
quite a while ago I bought both the tierod and the draglink. Now one of the balljoints is worn and needs to be replaced. What type of draglink end do I have to look for? Since I am located in Germany and I need it to pass technical inspection a indication from what car these came from would help to find one here locally.
Thanks for your help
Florian
Click to expand...
Our tierod or draglink uses a very common ES150 end that was used on IH's GM's and Fords of many years. So either ES150R for right hand thread or ES150L for left hand thread.
 
You must log in or register to reply here.
Back
Top