Latest activity

Probably has a E67 ecm. You'll have to unlock the ECM and disable VATS and then your BCM's won't affect the engine running.

A bit of work is involved with doing oversize valves ... The owner is into the shiny stuff .. Just might look as good as it...

The kit came with an O ring. Mine fell apart as soon as I started to remove it. Guessing that's where the leak was.

I did my first input seal when I was, maybe 15, and I just screwed in two screws into the seal and popped it out with a prybar. Then...

I kind of figured I had problems when the orbital valve came out. Would have been nice to have instructions on how to do the input seal...

You unthreaded the orbital valve, which is completely unnecessary to remove to do a input seal. Now your 22 ball bearings inside the box...

IH Parts America stocks the proper grease for closed knuckles and manual steering boxes under the Swepco brand - Swepco 164 Grease

IH Parts America stocks the proper grease for closed knuckles and manual steering boxes under the Swepco brand - Swepco 164 Grease

Nice Hi-Po parts ... The customer wanted O.S. SS valves installed ... Started in on that chore by doing a washup .. More...

There is supposed to be a stiffer spot in the center of the steering, thats your "over center" however it's only supposed to be 6-10 in...

Thanks, kind of figured something like that. I did find that the seal surface on the input shaft is kind of galled up and there was an...

Ya you've changed the alignment / timing internally the whole thign has to come apart and be built on the bench.

Had to order the damper and a flywheel from them ... They could had done the job there ... But ..... All good, the local shop can do ...

The Power steering input shaft on my 74 Scout was leaking, so today I installed a seal kit. When I went to pull the piece with the seal...

Thank you both for all of the insights. Yep, looks like depending on how much the leak continues to bug me I may be pulling the...