That Guy
Member
Running engine from a 72, (pretty sure it's not original to that 72) ran excellent although the valve cover gasket leaked bad. Pulled out to swap in a v8. Nothing wrong other than the leak. Has a new carb, starter and fuel pump.
Strong engine. $100
t18 (4:1 first) $250
is tight and sounded fine when driving. Was taken out during the swap, I just used the t18 that came with the v8 instead of changing the bell housing. It's pretty oily from the oil leak on the engine. Clutch linkage and bell included
Dana 20 $50
is also tight but crusty with dirt from years of buildup. Again, I just used the one that came with the v8.
No shipping, pickup preferred but delivery possible for gas money.
Pm or email bart@therestoshop.com
Parts are located in alviso, CA
Strong engine. $100
t18 (4:1 first) $250
is tight and sounded fine when driving. Was taken out during the swap, I just used the t18 that came with the v8 instead of changing the bell housing. It's pretty oily from the oil leak on the engine. Clutch linkage and bell included
Dana 20 $50
is also tight but crusty with dirt from years of buildup. Again, I just used the one that came with the v8.
No shipping, pickup preferred but delivery possible for gas money.
Pm or email bart@therestoshop.com
Parts are located in alviso, CA
Last edited:
